
Getting started
Getting started
How to use the remote control unit
You can use the remote control unit in place of the computer’s mouse.
Note: If
POWER FREEZE SHUTTER
MUTE | VOLUME |
MODE | MENU INPUT |
STANDARD |
LIGHT POINTER |
c
b
d
a
a Click 2 button | c Pointer button |
b Mouse button | d Click 1 button |
POINTER button: Each press will change the mouse cursor mode as shown below.
Mouse
Pointer
Stamp
Line
Mouse button: This can be used in place of the computer’s mouse pointing device to move the screen cursor.
cursor button
Click 1 button: This button corresponds to the button on a
•When this button is pressed in Stamp mode, you can mark the screen with a stamp.
•When this button is held down and used with the mouse button in Line mode, you can paint a line on the screen.
Click 2 button: This button corresponds to the right button on a standard mouse with two buttons.
•When in mouse cursor mode (Pointer, Stamp, or Line), you can return to mouse mode by pressing this button.
English 17