Polaroid 215EPolaview manual Using other useful functions

								Getting started
	Using other useful functions
	You may use buttons on the LCD projector or remote control unit for the
	following operations.
Selecting the	The LCD projector can display screens in one of five different languages. The
Language for On-	procedure and on-screen displays shown below assume that an RGB signal is being
Screen Displays	used as the input signal.
(for Model PV215E-C
only)			MENU
							LANGUAGE
		RGB ADJUST			>ENGLISHINPUT DISP ON
		RGB SYNC MENU			DEUTSCH
		SET UP PROJECTOR			FRANCAIS
		>LANGUAGE			ESPANOL
			/SPRACHE /LANGUE		ITALIANO
			/IDIOMA	/LINGUA
		SELECT : PUSH ZorX			SELECT : PUSH ZorX
		SET	: PUSH CorV
		END	: PUSH MENU		END		: PUSH MENU
	1. Press MENU to display the menu.
	2. Press Z or X to select LANGUAGE, and then press C or V to display the
	screen.
	3. Press Z or X to select the language.
	4. Press MENU twice to exit.
Selecting the Video	The LCD projector is equipped with full NTSC, PAL, SECAM, PAL-M, PAL-N
System Format	and NTSC4.43 video support. Usually set to AUTO, the broadcast format is
	automatically switched according to the tape inserted. If you experience poor color,
	however, you may have to set to NTSC, PAL, SECAM, PAL-M, PAL-N, or
	NTSC4.43 as described below.
	S-VIDEO/VIDEO input is selected (page 34).
			MENU
						VIDEO SYSTEM
		VIDEO ADJUST
					>AUTO
		SET UP PROJECTOR			PAL
		>VIDEO SYSTEM			SECAM
		LANGUAGE			NTSC
			/SPRACHE /LANGUE		PAL-M
			/IDIOMA	/LINGUA	PAL-N
		SELECT : PUSH ZorX			NTSC4.43
					SELECT : PUSH ZorX
		SET	: PUSH CorV
		END	: PUSH MENU		END		: PUSH MENU

1.Press MENU to display the menu.

2.Press Z or X VIDEO SYSTEM, and then press C or V to display the screen.

3.Press Z or X to select the desired video system.

4.Press MENU twice to exit.

English 35