Polaroid 215EPolaview manual Basic LCD projector operation, Turn on the power

Page 34

Getting started

Basic LCD projector operation

Before you begin, make sure…

You have read Important safeguards. (See page 7)

All connections are made. (See page 20)

The LCD projector is positioned properly. (See page 31)

The LCD projector is plugged in.

The lens cap is removed.

c

a d

 

VOLUME

 

MODE

T

S

A

 

N

 

D

A

 

R

D

 

MENU

 

INPUT

 

b

 

STATUS CODE

POWER FREEZE SHUTTER

MUTE

VOLUME

MODE

MENU INPUT

STANDARD

LIGHT POINTER

g

f e

aVOLUME +/- buttons

bINPUT button

cFREEZE button (remote control)

dMUTE button (remote control)

1.Turn on the power.

eINPUT button (remote control)

fVOLUME +/- button

(remote control)

gSHUTTER button (remote control)

(See “Turning the power on and off” on page 30)

2.Press INPUT on the LCD projector or remote control unit to select the desired input signal.

RGB PC-CARD S-VIDEO OR VIDEO

Continue to press INPUT to set the desired input signal. Each press will change the display as shown above.

You can turn the input signal display off. (See “Turning off the input signal display” on page 36.)

3.Turn on your computer (RGB) or start video playback (S-VIDEO or VIDEO).

Adjust FOCUS and ZOOM rings if necessary. (See “Adjusting the lens” on page 19)

English 33

Image 34
Contents Polaview215E Table of contents Polview 215E LCD Projector User’s Guide Appendix Polview 215E LCD Projector User’s Guide General information Declaration of Conformity Important safeguards General information General information LCD projector features IntroductionVideo board Contents of the LCD projector box Parts list and accessories Remote control unitBefore using the remote control LCD projector LCD projector back Bottom How to use the remote control unit Click 2 button Pointer button Mouse button Click 1 buttonSetting up the LCD projector Adjusting the lens Computer RGB signal Connecting the LCD projectorConnecting to a Chart. seeVCR Computer cables & adapters Pin assignments VGASetting the DIP SwitchesRS-232C connector Mini DIN 8-pin RS-232C connector D-Sub25-pinFactory preset timing Vertical frequency 85.080 Hz 72.8088 Hz 75.0000 Hz Vertical frequency 72.188 Hz 75.000 Hz 85.061 Hz Preset timing *Compression Turning the power on and off PowerSet the Main power switch on the LCD projector to OFF Positioning the LCD projector and screenLCD projector/screen relative position Turn on the power Basic LCD projector operationInput signal Input signal format Using other useful functions Disabling the Power button on the remote control unit Input Disp SET UP ProjectorLine conversion CancelingEnlarging scanning FunctionMinutes before Power is shut off Adjustment Adjusting the projected imageInput image Settings Adjustments for input imageRecall standard RGB sync adjustment Posi Vertical Position Control Adjustments for RGB inputPhase Control Posi Horizontal Position ControlPC Output Timing Relative Value Chart Adjusting the white balance Memory Projecting PC-Card ATA Flash Card data Press C or V to select an image When usingRepeat Play Jpeg Viewer installation Jpeg Viewer featuresType in A\SETUP.EXE and click OK Turn on the PC and start up Insert the PC-Card ATA Flash Card not supplied intoFollowing are the software’s menu items and their functions Select the PC-Card drive for saving images file name numbers are renewed automatically Select the image that you want to delete ProMouse Control Feature Windows 95 / WindowsProMouse installation Using the ProMouse Software How to program Macintosh Easy InstallCustom Install Turn on the MacintoshSelect the Option Connection Setting Select the Printer port or Modem port. Then click OKApple Menu How to program Maintenance AppendixSet the Main power switch to OFF and unplug the power cord Place the LCD projector up on its side as illustratedRemove the air filter unit Clean the filterReplace the air filter unit Replace the lamp Order Lamp 630146 Tools required a coin Remove the lamp unit screw Install the new lamp unitReplace the lamp unit screws Lamp Time Reset Before Requesting Service Specifications FCC, UL, C-UL, CE, VDE Polaroid Three Year Limited Warranty Polaroid Offices and Service Centers Norge