
Appendix
4.Remove the lamp unit screw.
Remove the lamp unit screws (2), then grasp the lamp unit handle and carefully pull it from the LCD projector. Keep the lamp housing opening to your right. Do not touch the lamp or point the lamp opening at anyone.
lamp unit screws
coin
Warning: The lamp may be hot. Be careful when handling.
Caution:
5.Install the new lamp unit.
Remove the 630146 lamp from the LCD projector and install a new lamp unit. (630146)
Do not drop. The impact of dropping may cause the lamp to explode.
S-VIDEO
lamp unit
6.Replace the lamp unit screws.
Replace the lamp unit screw and the lamp cover screws using a coin to tighten. Properly dispose of the old lamp.
7.Plug the LCD projector back in by inserting the power cord into the LCD projector AC socket, and set the MAIN power switch to ON.
8.Press POWER to turn the LCD projector ON.
9.Press MENU to display the menu.
| MENU |
| SET UP PROJECTOR |
| |||
RGB ADJUST | FRONT/REAR | FRONT | |||||
RGB SYNC MENU | INPUT DISP | ON | |||||
>SET UP PROJECTOR |
| REMOTE POWER | ON | ||||
LANGUAGE |
| EXPANSION (VGA) | ON | ||||
| /SPRACHE /LANGUE | >LAMP TIME RESET | NO | ||||
| /IDIOMA /LINGUA | SELECT : PUSH ZorX | |||||
SELECT : PUSH ZorX | |||||||
SET | : PUSH CorV | SET | : PUSH CorV | ||||
END | : PUSH MENU | END | : PUSH MENU |
|
|
English 67