Polaroid 215EPolaview manual RS-232C connector Mini DIN 8-pin, RS-232C connector D-Sub25-pin

Page 26

Getting started

c.RS-232C connector: D-Sub 9 pin Connect the RS-232C cable to the Mini DIN 8-pin connector on the LCD projector unit.

d.RS-232C connector: Mini DIN 8-pin

To convert a D-Sub 9-pin connector to a Mini DIN 8-pin connector, use a RS-232C 9-pin adapter (included). Connect the D-Sub 9-pin adapter and RS-232C cable. Then, connect it to the Mini DIN 8-pin connector on the LCD projector unit.

51

9				6
9				6

Pin		Signal
No.		Signal
No.
1	Unused
1	Unused

2	Received data
2	Received data

3	Transmitted data

4	Unused
4	Unused

5	Earth
5	Earth

6	Unused

7	Unused (Request to send)
7	Unused (Request to send)

8	Unused (Clear to send)
8	Unused (Clear to send)

9	Unused

68

35

12

	Pin	Signal
	No.	Signal
	No.
	1	Unused (Request to send)

	2	Unused (Clear to send)

	3	Transmitted data

	4	Earth

	5	Received data

	6	Unused

	7	Unused

	8	Unused

e.RS-232C connector: D-Sub25-pin

To convert a D-Sub 25-pin connector to a D-Sub 9-pin connector, use a RS-232C 25-pin adapter (included). Connect the D-Sub 25-pin adapter and RS-232C cable. And then connect it to the D-Sub 9-pin connector on the LCD projector unit.

13						1
13						1
25

						14
						14

Pin			Signal
No.			Signal
No.
1	Unused
1	Unused

2	Transmitted data
2	Transmitted data

3	Received data
3	Received data

4	Unused (Request to send)
4	Unused (Request to send)

5	Unused (Cleared to send)
5	Unused (Cleared to send)

6	Unused

7	Earth
7	Earth

8-25	Open
8-25	Open

	1	5
	6	9
	Pin	Signal
	No.	Signal
	No.
	1	Unused
	2	Received data
	3	Transmitted data
	4	Unused
	5	Earth
	6	Unused
	7	Unused (Request to send)
	8	Unused (Clear to send)
	9	Unused

English 25

Image 26

Contents Polaview215E Table of contents Polview 215E LCD Projector User’s Guide Appendix Polview 215E LCD Projector User’s Guide General information Declaration of Conformity Important safeguards General information General information LCD projector features IntroductionVideo board Contents of the LCD projector box Parts list and accessories Remote control unitBefore using the remote control LCD projector LCD projector back Bottom How to use the remote control unit Click 2 button Pointer button Mouse button Click 1 buttonSetting up the LCD projector Adjusting the lens Computer RGB signal Connecting the LCD projectorConnecting to a Chart. seeVCR Computer cables & adapters Pin assignments VGASetting the DIP SwitchesRS-232C connector Mini DIN 8-pin RS-232C connector D-Sub25-pinFactory preset timing Vertical frequency 85.080 Hz 72.8088 Hz 75.0000 Hz Vertical frequency 72.188 Hz 75.000 Hz 85.061 Hz Preset timing *Compression Turning the power on and off PowerSet the Main power switch on the LCD projector to OFF Positioning the LCD projector and screenLCD projector/screen relative position Turn on the power Basic LCD projector operationInput signal Input signal format Using other useful functions Disabling the Power button on the remote control unit Input Disp SET UP ProjectorLine conversion CancelingEnlarging scanning FunctionMinutes before Power is shut off Input image Adjusting the projected imageAdjustment Recall standard Adjustments for input imageSettings RGB sync adjustment Posi Vertical Position Control Adjustments for RGB inputPhase Control Posi Horizontal Position ControlPC Output Timing Relative Value Chart Adjusting the white balance Memory Projecting PC-Card ATA Flash Card data Repeat Play When usingPress C or V to select an image Type in A\SETUP.EXE and click OK Jpeg Viewer featuresJpeg Viewer installation Turn on the PC and start up Insert the PC-Card ATA Flash Card not supplied intoFollowing are the software’s menu items and their functions Select the PC-Card drive for saving images ﬁle name numbers are renewed automatically Select the image that you want to delete ProMouse Control Feature Windows 95 / WindowsProMouse installation Using the ProMouse Software How to program Macintosh Easy InstallCustom Install Turn on the MacintoshSelect the Option Connection Setting Select the Printer port or Modem port. Then click OKApple Menu How to program Maintenance AppendixSet the Main power switch to OFF and unplug the power cord Place the LCD projector up on its side as illustratedReplace the air filter unit Clean the filterRemove the air filter unit Replace the lamp Order Lamp 630146 Tools required a coin Replace the lamp unit screws Install the new lamp unitRemove the lamp unit screw Lamp Time Reset Before Requesting Service Specifications FCC, UL, C-UL, CE, VDE Polaroid Three Year Limited Warranty Polaroid Offices and Service Centers Norge