Polaroid 215EPolaview manual Set the Main power switch to OFF and unplug the power cord

			Appendix
Status Code	Symptom	Problem	Possible Solution
L-1	Lamp operation time is	It is nearly time to replace	Replace the lamp unit.
	over 1000 hours.	the lamp unit.	(See page 66).
L-0	Lamp operation time is	The lamp unit must be
	over 1100 hours.	replaced.
C-d	Forced cooling fan operat-
	ing to expedite lamp	—	—
	replacement (See page 65).

Note: Please wait one minute before turning the power back on, to allow the lamp to cool. A much longer time may be required if the LCD projector has reached an abnormally high internal temperature.

Cleaning the Air Filter The air filter should be cleaned about every 100 hours. Also, clean the air filter if “A-0” appears in the STATUS CODE display.

Replace the filter when it is clogged or dirty even after cleaning.

Cleaning procedure

Tools required: Vacuum cleaner.

Wait until the cooling fan stops and the STANDBY(R) ON(G) indicator turns solid red.

1.Set the MAIN power switch to OFF and unplug the power cord.

S-VIDEO	VIDEO IN
		L-
		AUDIO-R

RS232C

RGB IN

AUDIO IN	RGB OUT
		AUDIO OUT

MAIN
OFF	ON

MAIN

MAIN power switch

2.Place the LCD projector up on its side as illustrated.

indent

air filter unit

English 63