Polaroid 215EPolaview manual Turning the power on and off, Power

Getting started

Turning the power on and off

If the MAIN power switch on the LCD projector is pressed while the cooling fan is still operating, the operating life of the projector lamp will be shortened. Be sure to follow the procedure outlined below when turning the LCD projector power supply on and off.

S-
VIDEO	VIDEO IN
		L-
		AUDIO-R

RS232C

RGB IN

AUDIO IN
RGB OUT	AUDIO OUT

MAIN
OFF	ON

MAIN

d	POWER FREEZE SHUTTER
	MUTE	VOLUME
	MODE	MENU INPUT

a	STANDARD
	LIGHT POINTER

b

c

a POWER button/STANDBY(R)	c AC socket
ON(G) indicator	d POWER button
b MAIN power switch	(remote control)

Turning on the power 1. Insert the power cord into the LCD projector AC socket and connect it to a properly grounded wall outlet.

2.Set the MAIN power switch on the LCD projector to ON. The STANDBY(R) ON(G) indicator lights red.

The first time you turn on the power, or whenever the STANDBY(R) ON(G) indicator is not lit, press the MAIN power switch (ON/OFF) to turn on the power.

3.Press the POWER button on the LCD projector or remote control to turn on the power.

The STANDBY(R) ON(G) indicator flashes green while the LCD projector is warming up, and then changes to solid green when the picture is projected on the screen after approximately 45 seconds.

POWER

STANDBY (R)

ON (G)

When the power is on, the STANDBY(R) ON(G) indicator indicates the operating condition of the lamp.

Red	MAIN power on (lamp off)
Green	Lamp is ready
Flashing green	Warming up
Flashing red	Cooling fan operating

Note: When POWER is first pressed, and while the LCD projector is warming up, the “Polaroid” letter will be projected on the screen for approximately 30 seconds. During the warm-up period, no other picture can be projected on the screen.

30Polaview 215E LCD Projector User’s Guide