BenQ W7000+ user manual System Setup menu, Advanced Setup menu

System Setup menu

Function	Description
Language	Sets the language for the On-Screen Display (OSD) menus. See "Using the
	menus" on page 22 for details.
Splash Screen	Allows you to select which logo screen will display during projector start-up.
	You can choose BenQ logo screen, Blue screen or Black screen.
Projector Position	The projector can be installed on a ceiling or behind a screen, or with one or
	more mirrors. See "Choosing a location" on page 12 for details.
Auto Off	Prevents unnecessary projection when no signal is detected for a long time. See
	"Setting Auto Off" on page 45 for details.
Sleep Timer	Sets the auto-shutdown timer. The timer can be set to a value between 30
	minutes and 3 hours.
	Menu Display Time
Menu Settings	Sets the length of time the OSD will remain active after your last key press.
	Menu Position
	Sets the On-Screen Display (OSD) menu position.
Input Source	Selects an input source to be projected. See "Selecting an input source" on
	page 21 for details.
	Sets whether the projector searches automatically for input sources. If the
Auto Source Search	source scan is On, the projector will scan for input sources until it acquires a
	signal. If the function is not activated, the projector selects the last used input
	source.

Advanced Setup menu

Function	Description
	Lamp Power
	Selects the projector lamp power between Normal and Economic modes.
	Reset Lamp Timer
Lamp Settings	Once the lamp is renewed, select Reset to return the lamp timer to "0". See
	"Resetting the lamp timer" on page 48 for details.
	Equivalent Lamp Hour
	Shows the lamp hour information. See "Getting to know the lamp hour" on
	page 45 for details.
	Selects an input source type for the HDMI signal. You can also manually select
HDMI Settings	the source type. The different source types carry different standards for the
	brightness level.
	This function is only available when the HDMI signal is selected.
	Selects a baud rate that is identical with your computer’s so that you can
Baud Rate	connect the projector using a suitable RS-232 cable and update or download
	the projector’s firmware. This function is intended for qualified service
	personnel.
Test Pattern	Press ENTER to display the grid test pattern. It helps you adjust the image size
	and focus and check that the projected image is free of distortion.
	The function is only available when the projector detects no input signal.
High Altitude Mode	A mode for operation in areas like high altitude or high temperature. See
	"Operating in a high altitude environment" on page 34 for details.

42 Connecting with video equipment