Sanus Systems manual Assembly Instructions for Model VMPL3

Page 3

ENGLISH

Assembly Instructions for Model: VMPL3

Thank you for choosing a Sanus Systems VisionMount™ Wall Mount. The VMPL3 is designed to hold 27” to 84” [686 mm to 2133 mm] Flat Panel LCD or Plasma Displays weighing up to 280 lbs [127 kg].

CAUTION: The size and weight of your large screen television must not exceed 84” [2133 mm] diagonally and 280 Lbs [127.3 Kg], the maximum load capacity of the mount. Never use defective parts. Improper installation may cause property damage or personal injury. Do not use this product for any purpose that is not explicitly specified by Sanus Systems.

If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Sanus at 800.359.5520 or www.sanus.com. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replacement parts for products purchased through authorized dealers will be shipped directly to you. Check carefully to make sure that there are no missing or defective parts. Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please call Sanus Systems before returning products to the point of purchase.

NOTE: The supplied wall mounting hardware is not for metal stud or old cinder block walls. If you are uncertain about the nature of your wall, consult an installation contractor. Sanus makes every effort to assure all necessary television mounting hardware is included. If the hardware you need is not included please consult your local hardware store or call Sanus systems.

Required Tools: Drill, 3/16” bit (1/2” masonry bit for brick, concrete, or concrete block installations), wrench set, phillips screwdriver.

Supplied Parts and Hardware: (All threaded fasteners are shown full size.)

Wall Plate Assembly - A

Monitor Bracket Extension - B

Latch Extension - C

Qty. 1

Qty. 4

Qty. 2

Right Tilting Monitor Bracket - D

Left Tilting Monitor Bracket - E

Low Profile Monitor Bracket - F

Qty. 1

Qty. 1

Qty. 2

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

VMPL3_051106_ML.indd 3

7/17/06 11:36:52 AM

Image 3
Contents International Assembly Instructions for model VMPL3 VMPL3051106ML.indd 17/06 113649 AM Assembly Instructions for Model VMPL3 Screw N Diagram 1B Latch Configure the Monitor BracketsTilting Monitor Brackets See Diagram 1A Low Profile Monitor Brackets See Diagram 1BVMPL3051106ML.indd 17/06 113705 AM Diameter Bolt Diagram M4Diameter Bolt Diagram M5Diameter Bolt Diameter Bolt VMPL3051106ML.indd 17/06 113711 AM Add Safety Bolts Tilting Monitor Brackets only Diagram Configure Wall Plate AssemblyNylon Diagram 7A Brick, Solid Concrete, and Concrete Block Mounting Diagram 8B Flange NutDiagram 9A Diagram 9B Bottom Diagram 9C Diagram 9D Bottom Tab LatchHang the Television onto the Wall Plate Instrucciones de ensamblaje del modelo VMPL3 Arandela Diagrama 1B Seguro Paso 1 Configuración de los soportes de monitorEspañol Perno de Diámetro M4 Diámetro M6 Diagrama Español Perno de Diámetro M4Perno de diámetro M6 Diagrama Perno de Diámetro M5 Diámetro M8VMPL3051106ML.indd 17/06 113726 AM Tuerca Embridada Diagrama 9A Diagrama 9B Diagrama 9C Diagrama 9D Pestaña Inferior SeguroInferior Instructions de montage pour le modèle VMPL3 VMPL3051106ML.indd 17/06 113739 AM Étape 1 Configuration des supports du moniteur Et E Supports de moniteur fin voir le schéma 1BSchéma 1B Dispositif de verrouillage Schéma Vis de diamètreVis de diamètre Schéma Schéma Vis de diamètre Vis de diamètreM8 M5 Vis de diamètre Vis de diamètreM6Vis de diamètre M4Vis de diamètre Schéma Plaque murale Rondelle Schéma 7A En nylon ÉcrouÉcrou Embase RondelleEmbase Schéma 8B Montage sur brique, béton monolithe et parpaingsSchéma 9A PatteInférieure