Controls and Functions
1.COMBINATION IN/OUT Not used.
2.
Connect the
3.AUDIO (OUTPUT)
4.AUDIO (INPUT 1)
Not used with this model. Connect the audio outputs from your sources to an external audio receiver.
5.AUDIO (INPUT 2) (3.5-mm stereo mini jack)
Not used with this model. Connect the audio outputs from your sources to an external audio receiver.
6.ANALOG RGB OUT (INPUT 1) (15-pin D-Sub)
If desired, connect this output to the RGB input of a second display device.
This output is not active when the PlasmaWall is off or in standby
Note mode.
7.ANALOG RGB IN (INPUT 1)
Connect the RGBHV (5xBNC) output from the DHD Controller here.
8.DIGITAL RGB (INPUT 2) (DVI-D)
Controller to this input.
9.EXTERNAL SPEAKER OUTPUT (RIGHT)
Not used. Connect speakers to an external audio amplifier/receiver.
10.EXTERNAL SPEAKER OUTPUT (LEFT)
Not used. Connect speakers to an external audio amplifier/receiver.
11.POWER INPUT (100 to 240 VAC)
Connect the PlasmaWall to power here, using the included power cord.
12.MAIN POWER SWITCH
Connects or disconnects the PlasmaWall from the AC power source.
PlasmaWall SP Series Owner’s Operating Manual | 9 |