Sanyo VA-SW80LITE instruction manual Initial Setup Setup Window, LOG-IN Password

Page 20

INITIAL SETUP (SETUP WINDOW)

(User Level: ID4)

 

 

4DOWNLOAD AUTHORITY (Default setting: ID2, ID3)

This sets the download operation permissions for ID2 and ID3 user levels. Use the buttons to specify which operations are to be allowed for each user level and then click [OK]. Operations can also be enabled for user level ID2 and disabled for the higher user level ID3.

When images are downloaded, you can browse through the images even if the MASK function (for stopping the images from a specified channel from being displayed on the window), has been activated for that channel. This setting is used when download operation permissions have been restricted in order to prevent browsing of masked images.

5LOG-IN PASSWORD

(Default setting: ID1: 1111, ID2: 2222, ID3:

3333, ID4: 4444)

You can set the passwords for different user levels by the following procedure. Passwords consist of alphanumeric characters, and can be four to eight characters in length.

Example of changing: To change the password for ID2 from “2222” to “1234”

1 Type the new password (1234) into the password entry box and then click [OK].

The “Change password” dialog box will be displayed for you to confirm the password change.

2 Type the current password (2222) into the “CURRENT” box of the “Change password” dialog box, and type the new password once more into the “NEW” box, and then click [OK].

If the passwords that you entered are correct, the password will then be changed. You can change the passwords for other user levels in the same way.

If either the current or new password that you type into the box is incorrect, an error message will be displayed. If this happens, re-type the correct passwords.

6AUTO CLOCK ADJUST TIME (Default setting: OFF)

This function is used to automatically adjust the time for all DVRs to match the time set by the computer’s clock. Use the button to select “ON”, specify the adjustment interval, and then click [OK]. The automatic clock adjustment function will operate each time the specified interval of time has passed. Available settings: 1/2/3/6/12/24 hours

This function is invalid if the time will be switching to or from summer time within the current hour.

7SEQUENCE (Default setting: 1)

Use the spin buttons to set the display time (window switching interval) for each channel in the sequence screen.

Available settings: 1–30 seconds

Refer to page 17 for explanations of the setting buttons (OK/CANCEL).

English

19

Image 20
Contents VA-SW804 VA-SW80LITE Contents DVR Utility Software Features Software VersionDVR1 DVR2 DVR3DVR4 Network ConfigurationIP address setting range Recommended graphics chip Network ConfigurationSystem Requirements TCP/IP Settings For Windows XPInstalling the Software Welcome window appearsClick Next in the Choose Destination Location window Click Next in the Select Program Folder windowInstalling the Software Logging IN/LOGGING OFF/DISPLAY Language Setting User LevelLogging IN/LOGGING OFF/DISPLAY Language Setting Hardware key installationAuthentication check LoggingDisplay Language Setting Logging OffDisplay While Communication is in Progress ClickBasic Window Flowchart Clock & System P.23 Sequence P.44Timer Download P.66 Broadcast P.41Tamper Detect P.74 ExitBasic Network Settings Initial Setup Setup Window P.18System Setup tab User Level ID4Basic Network Settings System Update tabClock SET tab INFORMATION1 tabMenu Settings Menu Window P.28 Operation of Setting Buttons System Setup tab English, French, Spanish, GermanInitial Setup Setup Window LOG-IN PasswordRegister DVR tab Operation only possible at master computer Create ListBoxes respectively, and then click Select Auto in the TCP/IP ADDR. boxClick Specify the address of the registration to be deleted Select Manual in the TCP/IP ADDR. boxRegistration list display Clock and System Update Settings Default setting according to the computer’s internal clockClock SET tab Click the Clock SET tab indexClock and System Update Settings System Update tabINFORMATION1 tab Initialize HDD Power Failure INFORMATION2 tabUsed Time Firmware VersionBasic flow of menu settings Select a setting tab Current setting data is loaded and displayedLANGUAGE/LANGUE/IDIOMA/SPRACHE Default setting English LANGUAGE/D.S.TIME SET tabMenu Settings Menu Window Daylight Saving Default setting no USEFollowing example shows the default settings EXT. Clock Adjust TimeREC Mode SET tab Overwrite Default setting on Disk Full Reset button is forcibly lockedSeries REC Default setting OFF Resuming recording that has been halted5S, 10S, 20S, 40S, 1M, 2M, 3M, 4M, 5M, 10M, 15M, CC Timer REC SET tab SET Default setting OFFWeek START/STOPSelect WED from the Week drop-down list box in row Click Over 24HSelect MON from the Week drop-down list box in row This completes the holiday setting Holiday SET tabUse the Month and DAY spin buttons to set the month and day Up to 20 days can be specified as holidaysDATE/TIME Default setting on Alarm Count Default setting on Cumulative number of alarmsCamera Title Default setting on Title for connected camera DISPLAY/BUZZER SET tabOnly enabled when Overwrite is set to OFF KEY in Default setting OFFNON REC Default setting OFF BuzzerAvailable settings 1-30 seconds Alarm Monitor SETMonitor SET tab Monitor SETMask SET TITLE/MOTION SET tab Camera TitleBroadcast Transmission Settings Broadcast Window Timer RecordUser Level ID3/4 RecordBroadcast Transmission Settings Broadcast Window System UpdateClock SET User Level ID4 Select the required menu and then click OpenImage Display Windows Display Screen TypeQuad screen Multi screenSequence Display Function Switching Display WindowsImage Display Windows Title Bar Quad screen Multi screen Full screenMonitoring Live Images User Level ID1 or higher Monitoring with Quad ScreensClick 1 on the toolbar Double-click a DVR in the Target windowMonitoring Live Images User Level ID1 or higherMonitoring with Multi Screens Display example DVR-1 Live 01-20Disconnecting DVRs Volume adjustmentImage Audio Output Output channel selectionRecording Images Normal Recording User Level ID3 or higherRecording Images Normal recording from the multi screenClick the title bar 2 of the recording window Click 4 on the recording control panelTimer Recording Alarm Recording User Level ID4 Switches to live image mode Playing Back Recorded ImagesPlaying Back Recorded Images Click in the playback control panelPlaying Back Recorded Images Functions of Each Playback Control Panel ComponentSearching User Level ID2 or higherTime/Date Search Display the playback window for the DVR to be searchedAlarm Search SearchingSelect the alarm to be played back from the alarm list Selected alarm will change to blueClick5 After checking the images in the preview Window, clickAlarm Thumbnail Search Alarm Search window will be displayedDisplay the thumbnail images Click the title bar for the thumbnail to be played backSaving Still Images Playing back images in the main windowStill playback at the image to be saved Click the still button in the playback control panelDownload User Level ID2/3 or higherSpecifying the Image Range Click Download Start Point in the saving control panelDownload Functions of Each Download Window ElementLog window Download Start POINT/DOWNLOAD END PointFilename DownloadADD PreviewBasic Downloading Operations Individual Download Completion of download Preset List Operations Batch Downloads Deleting a preset fileDownloading all preset files Checking imagesTimer Download Timer Download StatusFolder Path Disk SpaceTimer download procedure Set the timer download settings as followsIf the Week setting for Schedule is set to DLY Set the download starting timeTimer download standby Program orange display Download timer reservation setSpecify the download destination folder Select the SET check boxImage range setting for downloading Example of incorrect settingDownload range 600 Download start time Download range 600 EnglishTimer Download Basic timer download operation and specifications Example DVR-1200306231500.mp2Communication Error User CanceledDownload Timeout Start TimeIf tampering was detected Tamper DETECTIONUser Level ID2 higherDisplaying detection results Installation/Saving Location Main FunctionsOperating Environment StartingMP2 Viewer Window Structure and Functions of Each Part File menuOption menu Zoom in Increases the image display sizeFilename Playback mode MP2 ViewerSlide bar Title barMP2 Viewer Opening Files Playback Control Select and open the image fileReview button Cue buttonMM-DD-YY Hhmmss MP2 Viewer Saves a Still ImagePrints Still Images MP2 Viewer Searches for Images Detecting Tampering of Images