Sanyo VA-SW80LITE Menu Settings Menu Window, Daylight Saving Default setting no USE, Example

Page 30

MENU SETTINGS (MENU WINDOW)

(User Level: ID4)

 

 

2DAYLIGHT SAVING (Default setting: NO USE)

This sets daylight saving time and whether daylight saving is to be used or not.

Available settings:

USE: The software switches automatically to daylight saving time.

NO USE: The software does not switch to daylight saving time.

If “USE” is selected, you will need to specify the dates and times for the software to switch from standard time to daylight saving time and from daylight saving time to standard time.

The following example shows the default settings.

Example:

After 1:59 on the last Sunday in March, the clock will change to show 3:00 and the time will advance by one hour.

To put the clock back by one hour so that 1:59 is followed by 1:00 on the last Sunday in October.

a b c d

To change the default setting, use drop-down list boxes and spin buttons to change the [ON (time for switching to daylight saving time)] and [OFF (time for daylight saving time to end)] settings, and then click [APPLY].

3EXT. CLOCK ADJUST TIME

If more than one DVR is connected, the clocks for all DVRs can be adjusted automatically to the same time.

Use the spin buttons to set the time, and then click [APPLY]. When a signal is input to the CLOCK ADJ IN terminal at the rear of the DVR, the time adjustment function will operate.

This only applies for DVRs that are equipped with a CLOCK ADJ IN terminal.

Refer to page 17 for explanations of the setting buttons (CANCEL/APPLY).

e f g h

a. Sets the week to change to daylight saving time.

b. Sets the weekday for changing to daylight saving time.

c. Sets the month for changing to daylight saving time.

d. Sets the hour for changing to daylight saving time.

e. Sets the week for daylight saving time to end.

f.Sets the weekday for daylight saving time to end.

g.Sets the month for daylight saving time to end.

h.Sets the hour for daylight saving time to end.

English

29

Image 30
Contents VA-SW804 VA-SW80LITE Contents DVR Utility Software Features Software VersionNetwork Configuration IP address setting rangeDVR1 DVR2 DVR3DVR4 Network Configuration System RequirementsRecommended graphics chip TCP/IP Settings For Windows XPClick Next in the Choose Destination Location window Installing the SoftwareWelcome window appears Click Next in the Select Program Folder windowInstalling the Software Logging IN/LOGGING OFF/DISPLAY Language Setting User LevelAuthentication check Logging IN/LOGGING OFF/DISPLAY Language SettingHardware key installation LoggingDisplay While Communication is in Progress Display Language SettingLogging Off ClickBasic Window Flowchart Clock & System P.23 Sequence P.44Tamper Detect P.74 Timer Download P.66Broadcast P.41 ExitSystem Setup tab Basic Network SettingsInitial Setup Setup Window P.18 User Level ID4Clock SET tab Basic Network SettingsSystem Update tab INFORMATION1 tabMenu Settings Menu Window P.28 Operation of Setting Buttons System Setup tab English, French, Spanish, GermanInitial Setup Setup Window LOG-IN PasswordRegister DVR tab Operation only possible at master computer Create ListSelect Auto in the TCP/IP ADDR. box ClickBoxes respectively, and then click Select Manual in the TCP/IP ADDR. box Registration list displaySpecify the address of the registration to be deleted Clock SET tab Clock and System Update SettingsDefault setting according to the computer’s internal clock Click the Clock SET tab indexClock and System Update Settings System Update tabINFORMATION1 tab Initialize HDD Used Time Power FailureINFORMATION2 tab Firmware VersionLANGUAGE/LANGUE/IDIOMA/SPRACHE Default setting English Basic flow of menu settings Select a setting tabCurrent setting data is loaded and displayed LANGUAGE/D.S.TIME SET tabFollowing example shows the default settings Menu Settings Menu WindowDaylight Saving Default setting no USE EXT. Clock Adjust TimeREC Mode SET tab Series REC Default setting OFF Overwrite Default setting onDisk Full Reset button is forcibly locked Resuming recording that has been halted5S, 10S, 20S, 40S, 1M, 2M, 3M, 4M, 5M, 10M, 15M, CC Week Timer REC SET tabSET Default setting OFF START/STOPClick Over 24H Select MON from the Week drop-down list box in rowSelect WED from the Week drop-down list box in row Use the Month and DAY spin buttons to set the month and day This completes the holiday settingHoliday SET tab Up to 20 days can be specified as holidaysCamera Title Default setting on Title for connected camera DATE/TIME Default setting onAlarm Count Default setting on Cumulative number of alarms DISPLAY/BUZZER SET tabNON REC Default setting OFF Only enabled when Overwrite is set to OFFKEY in Default setting OFF BuzzerMonitor SET tab Available settings 1-30 secondsAlarm Monitor SET Monitor SETMask SET TITLE/MOTION SET tab Camera TitleUser Level ID3/4 Broadcast Transmission Settings Broadcast WindowTimer Record RecordClock SET User Level ID4 Broadcast Transmission Settings Broadcast WindowSystem Update Select the required menu and then click OpenQuad screen Image Display WindowsDisplay Screen Type Multi screenSwitching Display Windows Image Display WindowsSequence Display Function Title Bar Quad screen Multi screen Full screenClick 1 on the toolbar Monitoring Live Images User Level ID1 or higherMonitoring with Quad Screens Double-click a DVR in the Target windowMonitoring with Multi Screens Monitoring Live ImagesUser Level ID1 or higher Display example DVR-1 Live 01-20Image Audio Output Disconnecting DVRsVolume adjustment Output channel selectionRecording Images Normal Recording User Level ID3 or higherClick the title bar 2 of the recording window Recording ImagesNormal recording from the multi screen Click 4 on the recording control panelTimer Recording Alarm Recording User Level ID4 Playing Back Recorded Images Switches to live image modePlaying Back Recorded Images Click in the playback control panelPlaying Back Recorded Images Functions of Each Playback Control Panel ComponentTime/Date Search SearchingUser Level ID2 or higher Display the playback window for the DVR to be searchedAlarm Search SearchingClick5 Select the alarm to be played back from the alarm listSelected alarm will change to blue After checking the images in the preview Window, clickDisplay the thumbnail images Alarm Thumbnail SearchAlarm Search window will be displayed Click the title bar for the thumbnail to be played backStill playback at the image to be saved Saving Still ImagesPlaying back images in the main window Click the still button in the playback control panelSpecifying the Image Range DownloadUser Level ID2/3 or higher Click Download Start Point in the saving control panelLog window DownloadFunctions of Each Download Window Element Download Start POINT/DOWNLOAD END PointADD FilenameDownload PreviewBasic Downloading Operations Individual Download Completion of download Downloading all preset files Preset List Operations Batch DownloadsDeleting a preset file Checking imagesTimer Download Folder Path Timer DownloadStatus Disk SpaceIf the Week setting for Schedule is set to DLY Timer download procedureSet the timer download settings as follows Set the download starting timeSpecify the download destination folder Timer download standbyProgram orange display Download timer reservation set Select the SET check boxDownload range 600 Image range setting for downloadingExample of incorrect setting Download start time Download range 600 EnglishTimer Download Basic timer download operation and specifications Example DVR-1200306231500.mp2Download Timeout Communication ErrorUser Canceled Start TimeTamper DETECTIONUser Level ID2 higher Displaying detection resultsIf tampering was detected Operating Environment Installation/Saving LocationMain Functions StartingOption menu MP2 Viewer Window Structure and Functions of Each PartFile menu Zoom in Increases the image display sizeSlide bar Filename Playback modeMP2 Viewer Title barReview button MP2 Viewer Opening Files Playback ControlSelect and open the image file Cue buttonMP2 Viewer Saves a Still Image Prints Still ImagesMM-DD-YY Hhmmss MP2 Viewer Searches for Images Detecting Tampering of Images