Sanyo VA-SW80LITE instruction manual Recording Images, Normal recording from the multi screen

Page 51

RECORDING IMAGES

●Normal recording from the multi screen

Images from multiple DVRs can be recorded at the same time from the multi screen. The operations for each window are the same as for the quad screen.

1

2

3

4

Click

(1) on the toolbar.

The multi screen will be displayed.

Click the title bar (2) of the recording window.

The title bar will change to blue.

Double-click a DVR in the “TARGET” window (3).

Live images from the selected DVR will be displayed in the window. The title bar will change to blue and image mode (LIVE) will be displayed.

Click (4) on the recording control panel.

The REC indicator on the DVR will illuminate and recording of the live images will start.

A b (red) mark will be displayed in the title bar while recording is in progress.

1

5 4

2

3

5 Recording in a maximum of four windows is possible using the same procedure.

6 To stop recording in a window, click the title bar to select the window and then click (5).

The REC indicator on the selected DVR will switch off and recording will stop.

●Recording images that are not displayed

When normal recording is being carried out, it is not necessary to have the live images displayed in any window on the screen. Once the DVR has been specified in the “TARGET” window on the screen, the commands made using the recording control panel will be valid regardless of the display status of the images.

•The “TARGET” window and the recording control panel will be displayed in the main screen, and normal recording will be possible.

•The “BROADCAST” window can be used to transmit recording start and stop commands all at once for all registered DVRs.

50

English

Image 51

Contents VA-SW804 VA-SW80LITE Contents Software Version DVR Utility Software FeaturesNetwork Configuration IP address setting rangeDVR1 DVR2 DVR3DVR4 Network Configuration System RequirementsRecommended graphics chip For Windows XP TCP/IP SettingsClick Next in the Select Program Folder window Installing the SoftwareWelcome window appears Click Next in the Choose Destination Location windowInstalling the Software User Level Logging IN/LOGGING OFF/DISPLAY Language SettingLogging Logging IN/LOGGING OFF/DISPLAY Language SettingHardware key installation Authentication checkClick Display Language SettingLogging Off Display While Communication is in ProgressBasic Window Flowchart Sequence P.44 Clock & System P.23Exit Timer Download P.66Broadcast P.41 Tamper Detect P.74User Level ID4 Basic Network SettingsInitial Setup Setup Window P.18 System Setup tabINFORMATION1 tab Basic Network SettingsSystem Update tab Clock SET tabMenu Settings Menu Window P.28 Operation of Setting Buttons English, French, Spanish, German System Setup tabLOG-IN Password Initial Setup Setup WindowCreate List Register DVR tab Operation only possible at master computerSelect Auto in the TCP/IP ADDR. box ClickBoxes respectively, and then click Select Manual in the TCP/IP ADDR. box Registration list displaySpecify the address of the registration to be deleted Click the Clock SET tab index Clock and System Update SettingsDefault setting according to the computer’s internal clock Clock SET tabSystem Update tab Clock and System Update SettingsINFORMATION1 tab Initialize HDD Firmware Version Power FailureINFORMATION2 tab Used TimeLANGUAGE/D.S.TIME SET tab Basic flow of menu settings Select a setting tabCurrent setting data is loaded and displayed LANGUAGE/LANGUE/IDIOMA/SPRACHE Default setting EnglishEXT. Clock Adjust Time Menu Settings Menu WindowDaylight Saving Default setting no USE Following example shows the default settingsREC Mode SET tab Resuming recording that has been halted Overwrite Default setting onDisk Full Reset button is forcibly locked Series REC Default setting OFF5S, 10S, 20S, 40S, 1M, 2M, 3M, 4M, 5M, 10M, 15M, CC START/STOP Timer REC SET tabSET Default setting OFF WeekClick Over 24H Select MON from the Week drop-down list box in rowSelect WED from the Week drop-down list box in row Up to 20 days can be specified as holidays This completes the holiday settingHoliday SET tab Use the Month and DAY spin buttons to set the month and dayDISPLAY/BUZZER SET tab DATE/TIME Default setting onAlarm Count Default setting on Cumulative number of alarms Camera Title Default setting on Title for connected cameraBuzzer Only enabled when Overwrite is set to OFFKEY in Default setting OFF NON REC Default setting OFFMonitor SET Available settings 1-30 secondsAlarm Monitor SET Monitor SET tabMask SET Camera Title TITLE/MOTION SET tabRecord Broadcast Transmission Settings Broadcast WindowTimer Record User Level ID3/4Select the required menu and then click Open Broadcast Transmission Settings Broadcast WindowSystem Update Clock SET User Level ID4Multi screen Image Display WindowsDisplay Screen Type Quad screenSwitching Display Windows Image Display WindowsSequence Display Function Quad screen Multi screen Full screen Title BarDouble-click a DVR in the Target window Monitoring Live Images User Level ID1 or higherMonitoring with Quad Screens Click 1 on the toolbarDisplay example DVR-1 Live 01-20 Monitoring Live ImagesUser Level ID1 or higher Monitoring with Multi ScreensOutput channel selection Disconnecting DVRsVolume adjustment Image Audio OutputNormal Recording User Level ID3 or higher Recording ImagesClick 4 on the recording control panel Recording ImagesNormal recording from the multi screen Click the title bar 2 of the recording windowTimer Recording Alarm Recording User Level ID4 Click in the playback control panel Switches to live image modePlaying Back Recorded Images Playing Back Recorded ImagesFunctions of Each Playback Control Panel Component Playing Back Recorded ImagesDisplay the playback window for the DVR to be searched SearchingUser Level ID2 or higher Time/Date SearchSearching Alarm SearchAfter checking the images in the preview Window, click Select the alarm to be played back from the alarm listSelected alarm will change to blue Click5Click the title bar for the thumbnail to be played back Alarm Thumbnail SearchAlarm Search window will be displayed Display the thumbnail imagesClick the still button in the playback control panel Saving Still ImagesPlaying back images in the main window Still playback at the image to be savedClick Download Start Point in the saving control panel DownloadUser Level ID2/3 or higher Specifying the Image RangeDownload Start POINT/DOWNLOAD END Point DownloadFunctions of Each Download Window Element Log windowPreview FilenameDownload ADDBasic Downloading Operations Individual Download Completion of download Checking images Preset List Operations Batch DownloadsDeleting a preset file Downloading all preset filesTimer Download Disk Space Timer DownloadStatus Folder PathSet the download starting time Timer download procedureSet the timer download settings as follows If the Week setting for Schedule is set to DLYSelect the SET check box Timer download standbyProgram orange display Download timer reservation set Specify the download destination folderDownload start time Download range 600 English Image range setting for downloadingExample of incorrect setting Download range 600Timer Download Example DVR-1200306231500.mp2 Basic timer download operation and specificationsStart Time Communication ErrorUser Canceled Download TimeoutTamper DETECTIONUser Level ID2 higher Displaying detection resultsIf tampering was detected Starting Installation/Saving LocationMain Functions Operating EnvironmentZoom in Increases the image display size MP2 Viewer Window Structure and Functions of Each PartFile menu Option menuTitle bar Filename Playback modeMP2 Viewer Slide barCue button MP2 Viewer Opening Files Playback ControlSelect and open the image file Review buttonMP2 Viewer Saves a Still Image Prints Still ImagesMM-DD-YY Hhmmss Detecting Tampering of Images MP2 Viewer Searches for Images