Sanyo VA-SW80LITE instruction manual TCP/IP Settings, For Windows XP

TCP/IP SETTINGS

TCP/IP (Transmission Control Protocol/Internet Protocol) is a standard protocol that is used for the Internet and intranets. When using the software on a network, you should first change the TCP/IP settings as required in accordance with the operating systems (OS) of the various computers that on the network that are to be used. (Operation is only guaranteed under Windows XP)

■For Windows XP

1 Click the Network Connections icon in the Control Panel.

The “Network and Internet Connections” window will be displayed.

2 Click “Local Area Connections”.

The “Network Connections” window will be displayed, and the settings for the LAN card (Ethernet adapter) being used will appear in the “LAN or High-Speed Internet” column.

3 Right-click on the LAN card (Ethernet adapter) being used, and then select “Properties (R)” from the pop-up menu.

The “General” tab window in the “Local Area Connection Properties” window will be displayed.

4 Check that “Internet Protocol (TCP/IP)” is selected in the list of components used by the Ethernet board that appears in the “This connection uses the following items: (O)” box.

If “Internet Protocol (TCP/IP)” is not selected, select it.

5 Click [Properties (R)].

The “General” tab window in the “Internet Protocol (TCP/IP) Properties” window will be displayed.

6

7

8

Select “Use the following IP address:

(S)” and then type in the IP address and the subnet mask.

Type in “255.255.252.0” as the subnet mask as shown in the illustration.

Check the settings, and then click [OK].

The display will return to the “Local Area Connection Properties” window.

Click [OK].

This completes the TCP/IP settings.

English 5