Sanyo VA-SW80LITE instruction manual 5S, 10S, 20S, 40S, 1M, 2M, 3M, 4M, 5M, 10M, 15M, CC

MENU SETTINGS (MENU WINDOW) (User Level: ID4)

5ALARM MODE (Default setting: OFF) This sets the recording mode for alarm recording. Make the selection from the drop-down list box and then click [APPLY].

Available settings:

•OFF: Alarm recording is not carried out.

•ENABLED: Alarm recording is always carried out regardless of the timer recording settings.

•AL-REC ON TIMER: Alarm recording is only carried out while timer recording is in progress.

•AL-REC OFF TIMER: Alarm recording is only carried out while timer recording is not in progress.

•OLY AL-REC ON TMR: Alarm recording is carried out during the time specified for timer recording, and timer recording is not carried out.

6ALARM DURATION (Default setting: 20S) This sets the alarm recording duration when an alarm occurs. Select the duration from the drop-down list box and then click [APPLY].

Available settings:

5S, 10S, 20S, 40S, 1M, 2M, 3M, 4M, 5M, 10M, 15M, CC

7ALARM SENSOR (Default setting: ALARM) This sets the operating conditions for alarm recording. Make the selection from the drop-down list box and then click [APPLY].

Available settings:

•ALARM: In response to an external alarm

•SENSOR: In response to motion sensor input

•ALARM OR SENSOR: In response to either an external alarm or motion sensor input

•ALARM AND SENSOR: In response to both an external alarm and motion sensor input occurring at the same time

8VIDEO LOSS (Default setting: ON)

This sets whether a warning is output or not when the image feed is cut off. Select “ON” or “OFF” and then click [OK] or [APPLY].

Available settings:

•ON: A warning is output when the image feed is cut off.

•OFF: No warning is output when the image feed is cut off.

If you would like the warning buzzer to sound when the image feed is cut off, set “VIDEO LOSS” to “ON” and then change the “BUZZER” setting. (P.37)

●Refer to page 17 for explanations of the setting buttons (CANCEL/APPLY).

32 English