Sanyo VA-SW80LITE Select Manual in the TCP/IP ADDR. box, Registration list display

INITIAL SETUP (SETUP WINDOW) (User Level: ID4)

BManual setting method

(A maximum of 250 devices can be set.)

1Select “MANUAL” in the “TCP/IP ADDR.” box.

The manual setting mode for addresses will be enabled.

2Manually set “IP ADDRESS” using the “NETWORK SET” menu for the DVR. Enter a number between 001 and 250 for the last three digits of the address.

3Click .

The buttons in the window will be locked.

4Registration list display

The “TCP/IP Address”, “MAC Address” and “DVR Type” that have been set manually will be displayed in the registration list.

5Click .

The buttons will be unlocked.

Select the address that is displayed (in blue) in the registration list and then double-click the address.

6Type the DVR name and attribute group

into the “DVR NAME” and “GROUP”

boxes respectively, and then click . The DVR name and attribute group that

have been typed in will be displayed in the registration list.

7Click .

The selected DVR will then be registered by the computer, and the “DVR Name” and “Attribute Group” settings will be applied to the DVR.

Repeat the above procedure to register other new DVRs.

(Only capital letters can be entered.)

●Deleting a DVR registration

Follow the procedure below to delete a DVR registration.

1 Specify the address of the registration to be deleted.

If you click on the address line of the registration list to be deleted, the display color will change to blue.

2 Disconnect the connection cable from the DVR to be deleted from the registration.

If you try to delete the DVR’s registration while the DVR is still connected to the network, an error will occur.

3 Click .

A dialog box asking you to confirm the registration deletion will be displayed. Click [OK] to confirm the deletion.

The registration for the specified DVR will be deleted from the registration list.

Repeat the above procedure to delete other DVR registrations.

22 English