Sanyo VA-SW80LITE Overwrite Default setting on, Disk Full Reset button is forcibly locked

MENU SETTINGS (MENU WINDOW) (User Level: ID4)

3OVERWRITE (Default setting: ON)

This sets what is to happen when the hard disk recording area becomes full.

Available settings:

•ON: When the recording area becomes full, recording continues automatically with new images being recorded over the top of already-recorded images.

(The [DISK FULL RESET] button is forcibly locked.)

If recording continues for long periods while “OVERWRITE” is set to “ON”, old images will be overwritten and deleted in the order that they were recorded.

You should regularly make copies of any important data if necessary.

•OFF: When the recording area becomes full, recording stops automatically.

(The [DISK FULL RESET] button is forcibly unlocked.)

Refer to the next page for details on how to resume recording.

●Resuming recording that has been halted

If “OVERWRITE” has been set to “OFF”, recording will stop automatically when the hard disk recording area becomes full and the “DISK FULL” criteria are met.

When this happens, you can resume recording in

overwrite mode by clicking. However, this varies from the normal situation when “OVERWRITE” is set to “ON” in that the data is only overwritten once, and when the recording area becomes full again, recording will stop once more.

4SERIES REC (Default setting: OFF)

If the series recording function has been set when more than one DVR is connected, recording can continue onto a second or subsequent hard disk when one hard disk becomes full. If using series recording, use the drop-down list box to select the timing for recording onto a 2nd hard disk to start, and then click [APPLY].

Available settings:

•OFF: Series recording is not carried out.

•–1M:Approximately 1 minute before the hard disk becomes full

•–2M:Approximately 2 minutes before the hard disk becomes full

•–3M:Approximately 3 minutes before the hard disk becomes full

English 31