Sanyo VA-SW80LITE Image Display Windows, Switching Display Windows, Sequence Display Function

IMAGE DISPLAY WINDOWS

■Switching Display Windows

To switch the display window, click the window select button on the toolbar or use the switching operation described below.

QUAD screen

CH1	CH2
CH3	CH4

1

2

MULTI screen

CH1	CH2
CH3	CH4

3

4

CH1

5

6

FULL screen

: Images from all cameras (channel 1 to channel 4) connected to the DVR

: Image from Camera 1 (channel 1) of the DVR

1QUAD screen → MULTI screen

• Click on the toolbar.

•Or double-click the quad screen.

2MULTI screen → QUAD screen

•Click the title bar to specify a DVR, and

then click on the toolbar.

•Or, double-click the DVR images that you would like to view in the quad screen.

3QUAD screen → FULL screen

• Click the channel number that you would

like to view in the full screen from	on
the toolbar.

■Sequence Display Function

4FULL screen → QUAD screen

• Click on the toolbar.

5MULTI screen → FULL screen

•Click the title bar to specify a DVR, and then click the channel number that you would like to view in the full screen from the

on the toolbar.

6FULL screen → MULTI screen

• Click on the toolbar.

If you click the in the toolbar of a quad or full screen, the images from all channels of the

specified DVR will be displayed in sequence in a full screen. If you click once more, sequence operation will stop and the display will return to the screen (quad or full) that was being displayed before sequence display started.

•This function is only enabled when live images are being displayed.

•The display interval set using [SEQUENCE] in the SYSTEM SETUP tab.

•Channels that are set to “MASK” or “NO VIDEO” are skipped during display.

44 English