Sanyo VA-SW80LITE MP2 Viewer Opening Files Playback Control, Select and open the image file

MP2 Viewer

■ Opening Files ■ Playback Control

After MP2 Viewer opens, follow the procedure below to open the image file to be played back.

1 Click on the toolbar.

Alternatively, select [Open(O)] from the File menu.

2 Select and open the image file.

Select the file in the Open dialog box and then click [Open]. The file will open and playback will start automatically.

You can also open an image file by dragging and dropping it directly into the window.

Use the toolbar command buttons for playback operations.

1 2 3 4 5 6 7

1Stop button:

If clicked during playback (including cue/ review/slow playback), playback will stop.

2Still button

If clicked during playback (including cue/ review), playback will be paused and a still image will be displayed. If clicked while the image is paused, frame advance playback starts.

3Slow play button

If clicked during playback (including cue/ review), slow playback starts. If clicked while the image is paused, frame advance playback starts.

4Review button

If clicked during playback (including cue), reverse playback starts.

5Playback button

If clicked, playback is carried out at the standard speed.

6Cue button

If clicked during playback (including review), fast-forward playback starts.

7Zoom in/Zoom out buttons

These operate in the same way as [ZOOM IN/ ZOOM OUT] in the Option menu.

78 English