Sanyo VA-SW80LITE Main Functions, Operating Environment, Installation/Saving Location, Starting

MP2 Viewer

The MP2 Viewer is a special playback software application that is used for the DSR-M804/800 series. It can be used to play back image data in MPEG2 format that has been saved from the DVR onto a recording medium such as and computer’s hard disk drive, a CompactFlash card or a CD-R.

■Main Functions

1.Plays back saved images data (sound cannot be played back).

2.Saves still playback images as JPEG files.

3.Prints still playback images.

4.Detects image tampering.

■Operating Environment

The following operating environment is required in order to use MP2 Viewer.

	Minimum	Recommended
CPU	Pentium III, 800MHz	Pentium 4, 1.7GHz
Memory	128MB	256MB
Display	XGA (1024 × 768 pixel), 16-million color or greater
	AGP graphics card for hardware overlay
	Or motherboard with onboard graphics chip*1
OS	Windows 98 Second Edition	Windows XP Professional

*1 Latest driver with 100% DirectX 8.1 compatibility is required.

■Installation/Saving Location

When the VA-SW804 DVR utility software is installed, the MP2 Viewer program is installed at the same time.

Path to saving location: C:\Program Files\

SANYO\VA-SW804

■Starting

When image data is downloaded from a DVR, MP2 Viewer is also saved automatically from the computer into the download destination folder. If you double-click MP2 Viewer, the program will start and you can then load the desired image files that are saved in the folder, so that the images can be played back regardless of where the storage medium is taken to and used.

The MP2 viewer should only be used by itself. If you use it at the same time as you are using other MPEG playback software, it may not operate correctly.

English 75