Sanyo VA-SW80LITE instruction manual TITLE/MOTION SET tab, Camera Title

MENU SETTINGS (MENU WINDOW) (User Level: ID4)

■TITLE/MOTION SET tab

This sets the motion sensor and camera title settings for each channel. Select the DVR in the “TARGET” window. The selected DVR will change to blue.

1

2

3

1Specifying a channel

Select a channel for motion sensor or camera title setting.

Available settings: CH1/CH2/CH3/CH4

2MOTION SENSOR Set

When motion sensor is set for monitoring, alarm recording is carried out automatically when a moving object is detected. The motion sensor detection conditions can be set as follows.

•Motion detection position

If you click, a live image from the specified DVR will be displayed in the preview window as a still image. Click on one of the squares in the 5 (width) × 4 (height) matrix in the center of the window. The sensor setting will alternate between “ON” and “OFF” each time you click.

•Background: Sensor ON

•No background: Sensor OFF

•Sensitivity (Default value: OFF) Select the sensitivity from the drop-down list box.

Available settings: OFF/1–10 The lower the value, the higher the sensitivity.

If using motion sensing to activate alarm recording, change the ALARM SENSOR menu setting to “SENSOR”.

3CAMERA TITLE

This sets the camera title for the specified channel. Type the camera title into the box, click [APPLY] and then click [OK].

•Maximum no. of characters: 10

•Allowable characters:

0–9 / A–Z / - / : / * / . / _ (space)

Default setting:

CH1: 1/CH2: 2/CH3: 3/CH4: 4

●Refer to page 17 for explanations of the setting buttons (CANCEL/APPLY).

40 English