Sanyo VA-SW80LITE instruction manual REC Mode SET tab

MENU SETTINGS (MENU WINDOW) (User Level: ID4)

■REC MODE SET tab

Click on the DVR to be set in the “TARGET” window to select it. The display color for the selected DVR will change to blue.

1

2

3

4

5

6

7

8

1PICTURE QUALITY (Default setting: HIGH) This sets the quality of the images that are recorded by the DVR. The higher the quality of the images, the shorter is the possible recording time capacity. Select the desired quality and then click [APPLY].

Available settings:

•SUPER: Super-high quality (84 recording hours or more)

•HIGH: High quality (168 recording hours or more)

•STANDARD: Standard quality (336 recording hours or more)

2AUDIO RECORDING (Default setting: ON) This sets whether audio is to be recorded at the same time as images (when alarm recording is not in progress). Select “ON” or “OFF” and then click [APPLY].

Available settings:

•ON: Audio signals are also recorded.

•OFF: Audio signals are not recorded.

If [AUDIO RECORDING] has been set to [ON], set [AUDIO RECORDING LEVEL] for each channel.

Available settings: 1–10 (Default setting: 5)

The possible recording times are for reference only, and are based on a 120 GB hard disk.

If the computer does not have a sound card installed (or if the sound card is disabled), it will not be possible to monitor DVR images which have [AUDIO RECORDING] set to [ON] or to play back the audio portions of recordings.

30 English