Sanyo VA-SW80LITE instruction manual Playing Back Recorded Images

PLAYING BACK RECORDED IMAGES (User Level: ID1 or higher)

■Functions of Each Playback Control Panel Component

(Playback) button:

This button is used to play back recorded images at normal speed.

(Stop) button:

This button is used to stop playback and to switch back to live mode.

•You can freely toggle between live mode and playback mode by clicking the Stop and Playback buttons alternately.

(Cue and Review) buttons:

The playback speed becomes incrementally faster when these buttons are clicked.

•Speed increments: ×7.5, ×15, ×30, ×180

The rate displayed for the playback speed is a guide to the playback speed. It may vary from the actual playback speed rate.

(Still) button:

This button is used to pause playback. A still image is displayed when this button is clicked.

•If you click the still button while playback is paused, frame advance playback (one frame at a time) is carried out.

•To cancel the still, click the playback button again.

(Slow play) button:

This button can be used to carry out slow playback after playback has been paused. The playback speed becomes slower each time the button is clicked.

•Speed increments: 1/8, 1/4, 1/2

●Notes on starting playback

•If playback is interrupted and then resumed using the computer, playback will resume from the point where it was previously stopped.

•The DVR will be reset once the software is closed, so playback will start again from the beginning of recording next time. This is the same as resetting the DVR itself.

●Playback speed display

The playback speed appears in the title bar of the playback window.

(Display example: PLAY × 1/2)

●Sound playback

If the “AUDIO RECORDING” menu setting is set to “ON”, you can play back the sound that was recorded along with the images. The method of selecting the cannel and adjusting the sound is the same as for live images. (P.48)

54 English