Memorex MVDR2100 manual Connecting the DVD to a TV Using the S-VIDEO Output Jack

CONNECTION-OUT (CONTINUED)

CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK

				To
				Audio In
S-Video	S-Video Cable (Not Included)
		Audio Audio Cable (Included)
From		From
Out			Out

To S-Video In

NOTES FOR CONNECTING TO A TV:

•If your TV has a Component input, connect the DVD recorder with the component cable for best results, otherwise use the S-Video or Video OUT jack(s) on the DVD recorder.

•Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

•When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.

•When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.

•If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.

•Connect the DVD recorder to your TV directly. If you connect the DVD recorder through a VCR, the playback picture will be distorted because DVD video discs are copy protected.

•Connect a cable, etc. signal as described on the top of page 9 to use the tuner capabilities of this unit and one of the OUT video connections on the CONNECTION pages to play a disc.

•Do NOT use the yellow video cable when connecting the unit with the S-video cable.

11