RECORDING (CONTINUED)
TIMER RECORD
Before setting the Timer Record, make sure the clock is set (see page 24).
1 |
|
|
|
|
|
| Record scheduler |
|
| ||
NO | Source Quantity | Date | Start | AM/PM | End |
1 |
|
|
|
|
|
2 |
|
|
|
|
|
3 |
|
|
|
|
|
4 |
|
|
|
|
|
5 |
|
|
|
|
|
6 |
|
|
|
|
|
Press the TIMER button; the Record Scheduler box will appear.
3 | Record scheduler |
| |||
1 |
| Item Editor |
| ||
QuantitySource | Date CH001Start | AM/PM | |||
2 | |||||
Quality |
| SP |
| ||
1 |
|
| |||
Once |
| 02/13/04 |
| ||
| Start |
| 01:48 |
| |
| AM/PM |
| PM |
| |
| End |
| 02:18 |
| |
| Confirm | Cancel |
| ||
| 3 |
|
|
| |
Use the Navigation (¹, ) buttons 1 to select SOURCE and press the ENTER button 2 to confirm selection. Use the Navigation (¹, ) buttons 1 to select the options, then press the ENTER button 2 to confirm. (For Entry Time or Date, using the Number button to input the time/date, then press the ENTER button 2 to confirm. Repeat this procedure for the following:
QUALITY: Select the record quality (HQ, SP, EP or SLP).
FREQUENCY: Select how often you want the program recorded: Once, Daily or Weekly.
DATE: Set the desired date using the Number buttons 3. Six digits must be pressed, two for the month, two for the date and two for the year.
START TIME: Set the desired start time using the Number buttons 3.
AM/PM: Select AM or PM for the desired start time.
END TIME: Set the desired end time using the Number buttons 3.
During input of the settings, if the entry is incorrect, the TV screen will show an "ERROR" message. When the error sentence occurs, you need to input the setting again.
2 | Record scheduler |
| |
| Item Editor |
| |
| ource QuantitySource Date CH001Start | AM/PM | |
| Quality | SP |
|
1 | Once | 02/13/04 |
|
Start | 01:48 |
| |
2 | AM/PM | PM |
|
End | 02:18 |
| |
1 |
| ||
Confirm | Cancel |
| |
Press the Navigation (¹, ) buttons 1 followed by the ENTER button 2 to select a schedule number.
NOTE: If no schedules have been set, then the first schedule number will be selected.
4
1
2
1
Select CONFIRM using the Navigation (¹, ) buttons 1 followed by the ENTER button 2; the schedule will then be set.
Five minutes before the start time, a record dialog box will appear on the screen. To confirm recording, select OK, to cancel, select CANCEL.
Press the TIMER button to exit the Record Scheduler screen.
NOTE: If you do not select OK or CANCEL, after a few minutes, the Record dialog box will disappear and the recording will start when the Starting recording time is reached.
NOTES:
•Make sure a blank DVD+R or DVD+RW with enough space is inserted in the unit.
•If the unit is in the standby mode, it will wake up two minutes before recording.
•During recording, press the STOP (■) button to stop recording.
•The length of the recording is determined by the disc capacity and recording quality as set on page 42.
• To delete a schedule, highlight it using the Navigation (¹, ) buttons, then press the ADD/CLEAR button.
46