Memorex MVDR2100 manual Connection-In, Connecting AN External Unit Using the AUDIO/VIDEO in Jacks

CONNECTION-IN

CONNECTING AN EXTERNAL UNIT USING THE AUDIO/VIDEO IN JACKS

External Unit

			From
			Audio
		Video Cable (Included)	Out
	To
To		Audio Cable (Included)
	Audio In
Video In

From Video Out

After connecting, plug the AC cord into an AC outlet, then press the Standby button to turn the unit on. Press the SOURCE button repeatedly to select the rear A/V jacks, "R-AV" will appear on the TV.

CONNECTING AN EXTERNAL UNIT USING THE S-VIDEO IN JACK

External Unit

From

AudioFrom

Out S-Video

Out

S-Video Cable (Not Included)

To S-	Audio Cable (Included)
Video In
To
Audio In

After connecting, plug the AC cord into an AC outlet, then press the Standby button to turn the unit on. Press the SOURCE button repeatedly to select the rear S-VIDEO jacks, "R-SV" will appear on the TV.

NOTES FOR CONNECTING AN EXTERNAL UNIT

•If your External unit has a S-video output, connect the DVD Recorder with the S-Video input jack for best quality, otherwise, use the A/V jacks.

•When connecting the DVD, refer to the owner’s manual of the external unit, as well as this manual.

•When connecting the DVD, make sure the power is off and both units are unplugged before making any connections.

•If the external unit only has one audio output, the use of a “Y” connector may be necessary. Visit your local electronics supply store.

•You can also connect the unit to the front jacks for both of the above scenarios as shown on page 15.

14