Memorex MVDR2100 manual ONE Touch Recording

RECORDING (CONTINUED)

ONE TOUCH RECORDING

1

Press the ON/STANDBY button to turn on the unit; the STANDBY indicator will go out.

2

Press the OPEN/CLOSE button to open the disc tray, “OPEN” will appear on the screen and in the display. Insert a DVD+R or DVD+RW with the label side facing up on the disc tray.

3 1

1

2

4

2

1

Set the options as desired (see the page 43). Press the OPEN/CLOSE button 1 to close the disc tray. “LOAD” will appear on the screen and in the display. Press the SOURCE button 2 to select the desired recording source.

To start recording, press the RECORD button 1; RECORD will appear on the TV screen and the unit will start recording after a few seconds. Press the RECORD button 1 again and the unit will record for 30 minutes. Repeatedly press the RECORD button 1 to increase the recording by 30 minutes each press. To stop recording before the preset stop time, press the STOP (■) button 2; STOP will appear on the TV screen and the unit will stop recording after a few seconds.

NOTE:

•The length of one-touch recording is determined by the disc capacity and recording quality as set on page 42.

45