MP3 BASIC OPERATION (CONTINUED)
PROGRAMMED PLAYBACK
This unit has a 99 track programmable memory that allows you to program up to 99 tracks on any disc for playback in any desired order. You may program 99 different tracks or you may also program certain tracks to play more than once. To perform programmed playback, proceed as follows:
1
Press the OPEN/CLOSE button to open the disc tray, “OPEN” will appear in the display. Insert a disc with the label side facing up on the disc tray.
2
1
1
2 
After loading, two boxes will appear on the screen; the left box will show all available folders/tracks on the disc and the right box will show the program. To select a track/folder to program, use Navigation (¹, ) buttons 1 to select then press the ADD/Clear button 2; the selected track will be added to the right program box. If you select a folder to add to the program box, all tracks in the folder will be added to the right program box.
31
3
2 
1
4
42
1
2
3 
To select a track inside the folder, use Navigation (¹, ) buttons 1 to select the desired folder, press the ENTER button 2 then select the desired track by using Navigation (¹, ) buttons 1. Press the ADD/CLEAR button 3 to add the track to the right program box. To return to select other folder, Press the Menu button 4
To delete a track, select the right program box using the Navigation (¨) button 1, then select the desired chapter to delete using the Navigation (¹, ) buttons 2, followed by the ADD/CLEAR button 3.
5
Select the top selection in the right program box, then click the ENTER button to start playback.
6 | 1 |
2
2 
2
2
TO CANCEL THE PROGRAM FUNCTION:
To cancel the Program function, select the Playback mode option using the Navigation (Ã,¨) buttons 2, then press the ENTER button 3. Select NORMAL using the Navigation (¹, ) buttons 2, then press the ENTER button 3.
NOTE: Program will be kept until the unit is turned off (at Standby mode) or the disc is changed.
37