3. Installation Procedures
3.Use the locking fixture on the rear panel to secure the four corners of scan device.
1 Rotate the locking fixture in the direction indicated by the arrow (rotate in the opposite direction for the
fixture), to secure scan device in place.
2Press in the locking fixture's stopper to prevent the fixture from moving.
Locking fixture
Stopper
4. Attach the pen stand.
Use the furnished Allen bolt to fasten the pen stand in place to the rear side of the unit.
Rear side of unit 
Pen stand | Allen bolt |
Tighten the Allen bolt using an Allen wrench (width across flats of 6 mm).
3.2.2Changing the pen battery
Battery cover | AAA (LR03) alkaline battery |
Notes:
¶ Insert battery correctly, aligning +/– polarities with the indications on the battery case.
¶ To prevent damage from battery leakage, remove the battery when not using the pen for an extended period (1 month or more). If battery leakage occurs, wipe away any battery fluid from inside the case and replace the battery with a new one.
¶ The provided alkaline battery should not be recharged, short- circuited, disassembled, or disposed of in fire.
¶ When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country / area.
18