Pioneer PDK-50HW3 specifications Double-click speed, Other setup

4. Installing and Using Software

b) Double-click speed

Set pen double-click speed.

Notes:

¶Screen appearance varies with computer environment.

¶Adjust pen settings to suit your personal preferences.

¶These settings also affect the double-click speed of the mouse.

¶Use the “Set Default” button to return to the default double-click speed.

c) Other setup

Set to enable/disable the small button of the pen, the 3-button mouse emulation function when small button is enabled, enable/disable recognition of changes in resolution and optimization of HTML operation. A check mark indicates that the respective function is enabled while the lack of a check mark indicates it is disabled.

Notes:

¶Screen appearance varies with computer environment.

¶The small button of the pen (middle mouse button) is enabled by default. Disable the small button (middle mouse button) in any application where pen operation interferes with the mouse.

¶Pen functions other than the small button (middle mouse button) cannot be changed.

¶To take advantage of all CB-Link utility functions, the small button (middle mouse button) must be enabled.

¶The 3-mouse button emulation function must be on to enable movement of graphical objects, zoom in/zoom out and other CAD software functions by holding down the small pen button (middle mouse button).

¶The function recognizing changes in resolution is on by default. On: A calibration warning appears when the resolution is changed.

Off: A value calibrated earlier will be applied automatically when the resolution is changed and no warning appears.

¶HTML optimization (click range) is disabled by default.

¶The click range can be set when optimization is on. Set to suit your personal preferences. Use the “Set Default” button to return to the default click range.

¶Do not enable this function when HTML works fine. Some range settings of this function may interfere with normal operation.

32