Panasonic WJ-HD500B manual Monitors and Displays, Spot and Multiscreen Monitor, Status Display

Page 35

MONITORS AND DISPLAYS

■Spot and Multiscreen Monitor

The WJ-HD500B Disk Recorder can be connected to two Monitors.

The monitor displays the video signal according to the con- nection made, as shown below.

Spot Monitor: The monitor that is connected to the SPOT OUT connector on the rear of the Recorder. It only displays the video input in single spot or sin- gle sequence.

Displaying the Disk Recorder’s playback is dis- abled.

Multiscreen Monitor: The monitor that is connected to the MULTISCREEN OUT connector on the rear of the Recorder.

It can display the video input in multiscreen mode (4, 7, 9, 10, 13,16 screen segments).

It also displays the Recorder’s playback images. Pressing the SETUP/ESC button for two seconds or more will automatically select this monitor and dis- play the Disk Recorder’s Setup menu.

Note: When a Disk Recorder equipped with the optional WJ-HDB502 Network Board is accessed from a PC via a network, the Multi- screen Monitor screen will turn blue and will not display live camera images. The monitor screen will display the message "Controlled (Network)".

Pressing one of the numeric buttons (1 -

16)will display the selected camera images in a single spot. This function is not available when CAMERA GENLOCK ON is selected on the COMMON SETUP menu.

Disk Recorder

WJ-HD500B

SPOT

OUT

OUT

MULUTISCREEN

Spot Monitor

Multiscreen Monitor

■Status Display

The status display shows the system status of the Disk Recorder.

It is displayed on the screen of the Multiscreen Monitor dur- ing recording and playback and contains the following information.

The status display is only available on the screen of the Multiscreen Monitor.

Pressing the DISPLAY button toggles all displays on the monitor on and off.

(The Spot Monitor only displays the Group Title and Camera Title.)

q

 

 

 

 

 

 

 

 

 

 

 

 

y

 

 

 

 

 

 

 

 

 

 

 

 

w

 

 

 

 

 

 

 

 

 

 

 

 

u

 

 

 

 

 

 

 

 

 

 

 

e

 

 

 

 

 

!0

r

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

t

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

i o

qTime Display

Displays the hours (24-hour), minutes, and seconds. “✽” indicates that summer time mode is selected.

wDate Display

eRecording Status and Recording Number Display Displays the recording status and recording number currently being played back.

The recording number is automatically assigned when recording.

REC ✽✽%: Indicates that images are being recorded. (✽✽ indicates the remaining space of the Hard Disk when the HDD DISKEND is set to STOP in the setup menu.)

EMERGENCY: Indicates that an Emergency Recording is being made.

✽✽✽✽✽✽✽✽✽: Recording Number (during playback)

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Operating Instructions Lightning flash with arrowhead symbol Contents Easy image search FeaturesPreface Reliable recording of eventsPrecautions Front View 2Set Button SET @4Alarm Search Button Alarm Search@8Setup/Escape Button SETUP/ESC 1Numeric Buttons 1$22Spot Output Connector Spot OUT @9Direction Buttons CDA B #0Full Indicator Full#1Hard Disk Drive Indicator HDD $1Multiscreen Output Connector Multiscreen OUT8Power Switch Power ON/OFF $7Alarm Port Alarm$9Mode Selector Mode 2Gen-lock Output Connector GEN-LOCK OUT3Multiscreen Selection Button WV-CU50 Remote Controller1Lock Button Lock 2Monitor Selection Button6Electronic Zoom Button EL-ZOOM 9Alarm Search Button Alarm Search1Link Indicator Link Blinking Pause mode 0JogDialInstalling the Optional Hard Disk InstallationInstalling the Optional Network Board Installing the Optional Motion Detector Board Mounting into the Rack Shown below are examples of system connections ConnectionsBasic System System ExpansionConnection with the Monitors Connection with the Remote ControllerConnection with the Camera Sites Alarm Alarm Port ConnectionControl Port Connection Connection with Control output Connection with the Uninterrupted Power Supply UPSMode Switch SettingConnection with the Extension Units Scsi ConnectionConnection with the DVD Extension Unit without HDD Switch SettingsConnection with the DVD Extension Unit Copy WJ-HDE510B EXT Connection with the DVD Extension Unit with HDDConnection to PS Data Compatible Equipment Mode Selector Setting10/100BASE-T Port Connection Serial Port ConnectionPage Preparations Power UP Procedure Formatting the Hard Disk 1DISK Format Formatting the DVD-RAM Disk Mirroring Function To deactivate the mirror function Disk Remove Time Display Monitors and DisplaysSpot and Multiscreen Monitor Status DisplayElectronic Zoom Display Format Error orSystem Status Display Group DisplayEmergency Recorder Timer RecorderHard Disk Manual RecorderDynamic Recording is set to OFF Time Lapse RecordingMulti Shot Recording Dynamic Recording is set to ALM-ONLY One Shot RecordingPage Setup Procedures Displaying the Setup Menu Setup MenuDisplay Setup Communication Setup Programming Menu SetupSetup Timer Setting Recording Setup Timer Setting Color Mode Setting Recording SetupRecording Quality Setup Video Pixels ResolutionSpace Group SetupGroup Title Setup Camera AssignmentRecording of the Title Display Thumbnail Display SetupPlayback Mode Setup Shuttle Speed Setup→ Manual with Audio → Manual Without Audio → Hard Disk End SetupManual Recording Mode Setting Event Recording Manual Recording Program Timer Alarm Active Mode Manual RecordingSpecial Day Timer Time Lapse Recording Internal Timer External Program TimerEvent Recording Alarm Active ModeMulti Shot Recording Internal Timer One Shot Recording Internal Timer Emergency Recording Time Lapse Recording Live Sequence Multiplexer SetupSequence Setup Multiscreen Monitor Live Sequence Pattern SettingSequence Timing Setting Quad Shift SettingQuad Pattern Setup Live Sequence Pattern Setting Sequence Setup Spot MonitorGroup Multi Sequence Setting Auto Skip SettingSequence Timing Setting Power on Setting Multiscreen MonitorPower on Setting Spot Monitor Secret View Setting Alarm Output Setting Alarm SetupAlarm Port Setting Alarm Auto Reset SettingVideo Motion Detector Setting Alarm Buzzer SettingVideo Loss Alarm Setting Alarm Mode on the Spot Monitor Alarm Mode on the Multiscreen MonitorClock Display Display SetupCamera Title Setup Display Setting Multiscreen MonitorStatus Display Title Display Setting Spot MonitorAlarm Display Setting Title DisplayTitle Display Position Setting Clock and Status Display Position SettingBaud Rate Communication SetupPS Data Setup Unit Address SettingStop Bit Alarm DataInput Camera Number Setup Parity CheckRS-232C Setup Network Setup SET Time System SetupClock Setup Time Adjustment SettingAuto Button Locked Setting Password Lock SettingBuzzer Setting User Defined SettingDisk Information Disk Space IndicatorDisk Management System Information Error ReportDVD Format DVD Drive SetupAlarm Recording Backup Disk Space Display Emergency Recording BackupDVD Disk End Setup Page Operating Procedures Single Spot Live Controlling the Video Input and MonitorsControlling the Spot Monitor Selecting the Spot MonitorZooming Single Spot Live Controlling the Multiscreen MonitorSelecting the Multiscreen Monitor Group Single Sequence Live All Input Display with Quad Shift Off Multiscreen Spot LiveMultiscreen Select All Input Display with Quad Shift On Group Display Multi Sequence LiveGroup Multi Sequence Multi Group setting Quad settingAlarm Operation Alarm Control FunctionAlarm Input Auto Reset Alarm ResetAlarm Suspension Manual ResetManual Recording Internal Timer RecordingPower-on Time Lapse Recording RecordingSet to ALM-ONLY Alarm RecordingAlarm Recording for Manual and Power-on Recording Time Lapse Recording Alarm Recording for Internal Timer ModesSet to ALM-MULTI Emergency Recording Forward or Backward search PlaybackBasic Playback StopRecord List Alarm jump searchSearch Record Function Jump searchTime & Date Search Alarm Log SearchDisplay Zooming Single Spot Playback Display on the MonitorSingle and Multiscreen Spot Playback REC Preview Displaying Camera and Playback ImageJogDial Backup FunctionALM-VMD2 Total 931RECORD Auto Erase Function Data Erase FunctionManual Erase Function Lock To release this function, follow the procedure belowButton Locked Function Playback of Backup Data Input and Output SpecificationsStandard Accessory GeneralN1102-0 V8QA6084AN
Top Page Image Contents