RECORDING
■Manual Recording
Manual Recorder
Manual Recorder
| Group 1 |
Timer | Group 2 |
Recorder | Group 3 |
| |
| Group 4 |
Emergency Recorder
HDD
The video signal supplied to the VIDEO IN connectors is recorded in Time Lapse Recording mode with the parame- ters which were preset in the MANUAL REC SETUP menu: recording mode, field rate and image quality.
The following procedure describes how to record manually in the selected mode.
Note: When the TIMER parameter is set to something other than OFF in the
1.Press the REC button to start recording.
REC ✽✽% is displayed on the Multiscreen Monitor.
(✽✽% indicates the remaining space of the Hard Disk.)
REC
2.To stop recording, press the REC STOP button.
REC STOP
■Internal Timer Recording
Manual Recorder
Timer Recorder | Group 1 | ||
Group 2 | |||
| Timer | ||
| Recorder | Group 3 | |
|
| ||
|
| Group 4 | |
| Emergency Recorder |
HDD
The internal timer recording begins when the reserved start time comes, and continues until the reserved end time is reached.
The reservations are made in the TIMER REC SETUP menu, and the TIMER parameter is set to INT in the
As described before, the received video inputs can be assigned to four groups, and those groups are assigned to the programmed timer.
It enables the use of different recording modes for each group (Time Lapse, Multi Shot or One Shot), depending on the requirements for the surveillance environment.
■Power-on Time Lapse Recording
• | FS 16 | Timer |
| Switch | |
|
|
•
•
Digital Disk |
| |
| Recorder |
|
WJ- | HD500 | AC Outlet |
|
|
The Disk Recorder can record images at the specific time every day, using the timer switch that controls the AC mains supplied to the Disk Recorder.
When the Disk Recorder is
To use this function, set the TIMER parameter to EXT in the
Manual Recorder
Manual Recorder
| Group 1 |
Timer | Group 2 |
Recorder | Group 3 |
| |
| Group 4 |
Emergency Recorder
HDD
88