Panasonic WJ-HD500B manual Backup Function, JogDial

Page 97

BACKUP FUNCTION

The recorded images in the Disk Recorder can be stored on the DVD-RAM disk by copying the selected records when the system is equipped with the DVD Extension Unit.

Notes:

This function is only available when the optional DVD Drive Unit (procured locally) is connected to the COPY port on the rear of the Disk Recorder.

It is recommended to backup the recorded data in case of a malfunction or accident.

Follow the procedures described below to copy to the DVD-RAM disk.

1.Select the group to be played back by pressing the GROUP SELECT button.

2.Pressing the ALARM SEARCH button toggles the indi- cator in the button on and off.

Selecting either mode will display the list as shown below.

On: Displays only the Alarm and Emergency Record List of the selected group.

Off: Displays all Record Lists for the selected group.

3.Press the INDEX button to display the list selected on the Multiscreen Monitor as shown below.

Pressing the INDEX button will toggle the window between List and Thumbnail search.

The backup function is enabled only the list table is dis- played on the monitor.

Record List

 

 

 

DATE MAY29.00

 

ALL GROUP

 

 

 

NO

GROUP

 

TIME

REC-MODE

 

000010009

G2

23:59:59

T/L

 

000010008

G1

22:15:40

M/S ALM-TRM12

INDEX

000010007

G3

21:00:07

O/S ALM-VMD3

000010006

ALL

17:33:05

T/L

 

000010005

ALL

7:23:11

T/L EMR

 

000010004

G4

6:59:44

M/S ALM-PC4

 

000010003

ALL

8:55:28

T/L MAN

 

000010002

G3

0:01:28

T/L ALM-TRM1

 

 

 

 

 

(TOTAL

2343RECORD)

 

 

 

 

 

 

 

 

SEARCH: MAY29.00

0:01 G1

 

 

 

ALARM # SEARCH:[DISPLAY]

 

 

 

 

SEL:←→

CHG:+–

EXE:SET

ESC:FSTOP

 

 

 

 

 

 

 

 

Search Editing Area

Note: The displayed list can be switched to the select- ed group by pressing the GROUP SELECT button.

4.Press the DISPLAY button to display the record list with the search (SEARCH) editing area as shown in the fig- ure.

DISPLAY

5.Move the cursor to the position to be edited in the search editing area by pressing the A, or B button.

6.Select the desired digit or month by pressing the + or

-button.

7.Repeat procedures 5 and 6 to edit the other positions.

8.Press the PLAY/PAUSE button to start the search.

A list of records including the most recent recording will appear on the monitor.

9.Rotate the JogDial clockwise or counterclockwise to move the cursor to the record to be stored on the disk.

Multiple records can be selected for storing as shown below.

Select a record on the table by rotating the JogDial, then press the SET button.

Select the next record on the table by rotating the

JogDial.

The records placed between can be selected for stor- ing by executing the following procedure.

10.Press the COPY button to start copying.

The display "COPYING" appears on the lower-left cor- ner in the menu.

 

DATE MAY29.00

 

ALL GROUP

 

NO

GROUP

TIME

REC-MODE

 

000010009

G2

23:59:59

T/L

 

000010008

G1

22:15:40

M/S ALM-TRM12

 

000010007

G3

21:00:07

O/S ALM-VMD3

 

000010006

ALL

17:33:05

T/L

COPY

000010005

ALL

7:23:11

T/L EMR

000010004

G4

6:59:44

M/S ALM-PC4

 

000010003

ALL

8:55:28

T/L MAN

 

000010002

G3

0:01:28

T/L ALM-TRM1

 

 

 

(TOTAL

2343RECORD)

COPYING MAY29.00 000003

PLAY:B ESC:FSTOP SEL:JOG

SEARCH:DISPLAY

11.When the copying is completed the display "COPY DONE!" appears in the menu.

DATE MAY29.00

 

ALL GROUP

NO

GROUP

TIME

REC-MODE

000010009

G2

23:59:59

T/L

000010008

G1

22:15:40

M/S ALM-TRM12

000010007

G3

21:00:07

O/S ALM-VMD3

000010006

ALL

17:33:05

T/L

000010005

ALL

7:23:11

T/L EMR

000010004

G4

6:59:44

M/S ALM-PC4

000010003

ALL

8:55:28

T/L MAN

000010002

G3

0:01:28

T/L ALM-TRM1

 

 

(TOTAL

2343RECORD)

COPY DONE! LEFT:20%

PLAY:B ESC:FSTOP SEL:JOG

SEARCH:DISPLAY

12.To quit copying, press the STOP button to exit from the menu.

97

Image 97
Contents Operating Instructions Lightning flash with arrowhead symbol Contents Preface FeaturesReliable recording of events Easy image searchPrecautions Front View @8Setup/Escape Button SETUP/ESC @4Alarm Search Button Alarm Search1Numeric Buttons 1 2Set Button SET#1Hard Disk Drive Indicator HDD @9Direction Buttons CDA B #0Full Indicator Full$1Multiscreen Output Connector Multiscreen OUT $22Spot Output Connector Spot OUT$9Mode Selector Mode $7Alarm Port Alarm2Gen-lock Output Connector GEN-LOCK OUT 8Power Switch Power ON/OFF1Lock Button Lock WV-CU50 Remote Controller2Monitor Selection Button 3Multiscreen Selection Button1Link Indicator Link 9Alarm Search Button Alarm SearchBlinking Pause mode 0JogDial 6Electronic Zoom Button EL-ZOOMInstalling the Optional Hard Disk InstallationInstalling the Optional Network Board Installing the Optional Motion Detector Board Mounting into the Rack Basic System ConnectionsSystem Expansion Shown below are examples of system connectionsConnection with the Camera Sites Connection with the Remote ControllerConnection with the Monitors Alarm Alarm Port ConnectionControl Port Connection Connection with Control output Connection with the Uninterrupted Power Supply UPSConnection with the Extension Units Switch SettingScsi Connection ModeConnection with the DVD Extension Unit Switch SettingsConnection with the DVD Extension Unit without HDD Copy WJ-HDE510B EXT Connection with the DVD Extension Unit with HDDConnection to PS Data Compatible Equipment Mode Selector Setting10/100BASE-T Port Connection Serial Port ConnectionPage Preparations Power UP Procedure Formatting the Hard Disk 1DISK Format Formatting the DVD-RAM Disk Mirroring Function To deactivate the mirror function Disk Remove Spot and Multiscreen Monitor Monitors and DisplaysStatus Display Time DisplaySystem Status Display Format Error orGroup Display Electronic Zoom DisplayHard Disk Timer RecorderManual Recorder Emergency RecorderMulti Shot Recording Time Lapse RecordingDynamic Recording is set to OFF Dynamic Recording is set to ALM-ONLY One Shot RecordingPage Setup Procedures Displaying the Setup Menu Setup MenuSetup Timer Setting Recording Setup Programming Menu SetupDisplay Setup Communication Setup Timer Setting Recording Quality Setup Recording SetupVideo Pixels Resolution Color Mode SettingGroup Title Setup Group SetupCamera Assignment SpacePlayback Mode Setup Thumbnail Display SetupShuttle Speed Setup Recording of the Title DisplayManual Recording Mode Setting Hard Disk End Setup→ Manual with Audio → Manual Without Audio → Event Recording Manual Recording Program Timer Alarm Active Mode Manual RecordingSpecial Day Timer Time Lapse Recording Internal Timer External Program TimerEvent Recording Alarm Active ModeMulti Shot Recording Internal Timer One Shot Recording Internal Timer Emergency Recording Time Lapse Recording Sequence Setup Multiscreen Monitor Multiplexer SetupLive Sequence Pattern Setting Live SequenceQuad Pattern Setup Quad Shift SettingSequence Timing Setting Group Multi Sequence Setting Sequence Setup Spot MonitorAuto Skip Setting Live Sequence Pattern SettingPower on Setting Spot Monitor Power on Setting Multiscreen MonitorSequence Timing Setting Secret View Setting Alarm Port Setting Alarm SetupAlarm Auto Reset Setting Alarm Output SettingVideo Loss Alarm Setting Alarm Buzzer SettingVideo Motion Detector Setting Alarm Mode on the Spot Monitor Alarm Mode on the Multiscreen MonitorCamera Title Setup Display SetupDisplay Setting Multiscreen Monitor Clock DisplayAlarm Display Setting Title Display Setting Spot MonitorTitle Display Status DisplayTitle Display Position Setting Clock and Status Display Position SettingPS Data Setup Communication SetupUnit Address Setting Baud RateInput Camera Number Setup Alarm DataParity Check Stop BitRS-232C Setup Network Setup Clock Setup System SetupTime Adjustment Setting SET TimeBuzzer Setting Password Lock SettingUser Defined Setting Auto Button Locked SettingDisk Management Disk Space IndicatorDisk Information System Information Error ReportAlarm Recording Backup DVD Drive SetupDVD Format DVD Disk End Setup Emergency Recording BackupDisk Space Display Page Operating Procedures Controlling the Spot Monitor Controlling the Video Input and MonitorsSelecting the Spot Monitor Single Spot LiveSelecting the Multiscreen Monitor Controlling the Multiscreen MonitorZooming Single Spot Live Group Single Sequence Live Multiscreen Select Multiscreen Spot LiveAll Input Display with Quad Shift Off All Input Display with Quad Shift On Group Display Multi Sequence LiveGroup Multi Sequence Multi Group setting Quad settingAlarm Input Alarm Control FunctionAlarm Operation Alarm Suspension Alarm ResetManual Reset Auto ResetPower-on Time Lapse Recording Internal Timer RecordingRecording Manual RecordingAlarm Recording for Manual and Power-on Recording Alarm RecordingSet to ALM-ONLY Set to ALM-MULTI Alarm Recording for Internal Timer ModesTime Lapse Recording Emergency Recording Basic Playback PlaybackStop Forward or Backward searchSearch Record Function Alarm jump searchJump search Record ListDisplay Alarm Log SearchTime & Date Search Single and Multiscreen Spot Playback Display on the MonitorZooming Single Spot Playback REC Preview Displaying Camera and Playback ImageJogDial Backup FunctionALM-VMD2 Total 931RECORD Auto Erase Function Data Erase FunctionManual Erase Function Button Locked Function To release this function, follow the procedure belowLock Playback of Backup Data Standard Accessory SpecificationsGeneral Input and OutputN1102-0 V8QA6084AN