Panasonic PT-DW5100U, DW5100UL, PT-D5700UL operating instructions Adjusting the position

Page 31

SHARPNESS

“SHARPNESS” is used to adjust the crispness of the image.

: Sharpens the edge of the image. : Softens the edge of the image.

NOISE REDUCTION

In this mode, the video noise is reduced. OFF : No correction

1: Low

2: Middle

3: High

AI

Gray scale control is exercised to suit the images, and optimal images with a clear contrast are projected.

ON : AI compensation is enabled.

OFF : AI compensation is disabled.

SYSTEM SELECTOR

Set this according to the connected signal system.

(S-Video/Video terminal input signal) AUTO : This is the standard setting. The

received signal system is automatically identified.

AUTO NTSC NTSC4.43 PAL

PAL60 SECAM PAL-N PAL-M

Note • When signal deterioration or other factors prevent images from being displayed correctly with the “AUTO” setting, change the setting to match the connected signal system.

(RGB1/RGB2 terminal input signals) AUTO : This is the standard setting. The

received signal system is automatically identified.

When VGA60/480p signals are input

AUTO VGA60

YCBCR 480pRGB

When other than VGA60/480p are input

AUTO RGB

YPBPR (YCBCR)

For the signals which are supported, refer to page 62.

Adjusting the position

POSITION

SHIFT

ASPECT

4:3

ZOOM

 

CLOCK PHASE

+16

KEYSTONE

 

MENU SELECT

SUB MENU

SHIFT

The position where the images are displayed can be moved here.

: The position is moved horizontally. : The position is moved vertically.

ASPECT

AUTO : (For S-Video/Video signals only)

At this setting, when S1 video signals*1 are identified as being input to the S-Video connector or video ID signals are identified as being input to the video connector, the images are displayed after automatically being converted to the 16:9 aspect ratio.

16:9 : At this setting, when standard signals*2 are input, the images are converted to the 16:9 aspect ratio and displayed. When wide-screen signals*3 are input, the images are displayed with their inherent aspect ratio intact.

4:3 : At this setting, when standard signals*2 are input, the images are displayed with their inherent aspect ratio intact. When wide-screen signals*3 are input, they are converted by the PT-D5700U/PT- D5700UL to the 4:3 aspect ratio and displayed. With the PT-DW5100U/PT-DW5100UL, the images are reduced in size and displayed without converting their aspect ratio so that they will fit onto a screen with a 4:3 aspect ratio.

S4:3 : Select this setting when using a 16:9 screen.

H FIT : Pictures are displayed using all the panel pixels in the horizontal direction. When a signal has an aspect ratio taller than that of the panel pixel*4, the image will be displayed with the top and bottom portions cut off.

V FIT : Pictures are displayed using all the panel pixels in the vertical direction. When a signal has an aspect ratio wider than that of the panel pixel*4, the image will be displayed with the left and right sides cut off.

HV FIT : The image is displayed on all the panel pixels*4. When the aspect ratio of the input signal is different from that of the panel pixel*4, the signal is transformed to the aspect ratio of the panel pixel*4 and then displayed.

*1 S1 video signals are 16:9 video signals to which is added the detection signal output from the video deck or other unit which supports the wide-screen format.

*2 Here, the standard signal means 4:3 or 5:4 input signals.

*3 Here, the wide-screen signals means 16:9, 15:9 or 15:10 input signals. *4 Panel pixel aspect ratio is 4:3 in the case of PT-D5700U/PT-

D5700UL and 15:9 for PT-DW5100U/PT-DW5100UL.

Attention • If you choose an aspect ratio that does not match the source video’s aspect ratio, you

will see a picture with an aspect ratio not the same as that of the original picture. Choose the appropriate aspect ratio carefully to match that of the original picture.

(Continued on the next page)

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Model No. PT-D5700U Commercial UseModel number PT-D5700U/PT-D5700UL/PT-DW5100U/PT-DW5100UL Dear Panasonic CustomerSerial number PT-D5700U/PT-D5700UL/PT-DW5100U/PT-DW5100UL Contents Precautions with regard to safety Always disconnect all cables before moving the projector Remove empty batteries from the remote control at onceDo not use or handle the batteries improperly Do not disassemble the lamp unitElectric shocks can result if this is not done AccessoriesDo not use the old lamp unit Do not place the projector in extremely hot locationsPrecautions on handling Name and function of parts Remote controlBottom Status LED lights Front and side of the projectorRear view of the main unit Controls on rear panel Side-mounted connection terminals Effective range of remote control operation Using the remote control unitLoading dry cells Connect to the projector to use with a cable Setting projector ID number to remote controlInstallation geometry InstallationProjection schemes PT-D5700U, PT-D5700UL Screen aspect ratio Projection distance by projection lensInstallation Screen aspect ratio PT-DW5100U, PT-DW5100ULET-DLE100 ET-DLE200 ET-DLE310 ET-DLE410 PT-DW5100U, PT-DW5100UL Screen aspect ratioCalculation formulas for projection distance by lens types Connection Setup precautionsPin assignments on the RGB2 input terminal are as follows Example of connecting with PCs Example of connecting with AV productsWhen operating at the projector, please refer to Powering up the projectorMaking adjustment and selection Press the I button. on the main unit or the remote controlDirect power off function Powering off the projectorHow to adjust the FOCUS, Zoom and Shift How to adjust the lensHow to remove the projection lens Press the Shutter button again Automatic adjustmentPress the Status button on the remote control Status functionOn-screen menus For RGB signalsFor DVI signals For S-Video/Video/YPBPRsignalsReturning to the previous Menu items settingResetting to the factory default Basic menu operationsAdjusting the picture Adjusting the position Digital Cinema Reality Clock PhaseZoom KeystoneClamp Position Input ResolutionEdge Blending Raster Position XGA ModeSxga Mode Press to select an item, and press to adjust the settingPress to select R, G, B and Wh OPTION1 settingsPress the Enter button Press to adjust the values Color MatchingBack Color Contrast ModeAuto Signal Color CorrectionOSD Position DVI Signal LevelDVI Edid FUNC1Altitude OPTION2 settingsInstallation Projector IDRS-232C Lamp PowerLamp Select Lamp RelayCycle of displayed internal test patterns Auto Power OFFPassword System InformationConnection example Setting the networkConnecting the PC System requirementsClick Change password Using Web Browser ControlAccessing from the Web browser Password changeBasic control Change password buttonDetail control Monitor information Error informationOK Normal operation Failed Occurrence of trouble When Failed has appeared for an item Parameter Description Mail set upAn error is detected by self- diagnosis Mail setup page ContinuingPing test Authentication server set upDNS server set up Change the authentication method as desiredAdjust clock Contents of mail sentNetwork status Network configCommand Control Description Remarks Using the PJLink protocolSupported commands PJLink security authenticationControl Device Setup Setting the securityPassword Change Display SettingExamples of connection Using the serial terminalsPin assignments and signal names Communication conditions Factory settingPin assignments and control Control commandsCable specifications Connecting to a PC Computer Projector DTE specificationsIndication of lamp monitor Dismantle the air filter Cleaning and replacement of air filterProcedure of cleaning Clean the air filterAfter When to replace the Lamp unitReplacing the lamp unit LampHave a Phillips screwdriver ready ahead of time Lamp unit replacement stepsRemove the two screws securing the fan unit Lamp unit will be hot after it has been usedInstallation procedure Ceiling Mount Bracket SafeguardsImage is blurred Power doesNot turn on No imagePT-D5700U PT-D5700UL PT-DW5100U SpecificationsReplacement lamp unit Length of power cord CabinetOutside dimensions Remote control Power sourcePAL-M/PAL60 PAL/PAL-N/SECAM Compatible Signal ListInstallation dimensions diagram DimensionsUnit mm, inch Trademark Acknowledgement Concernant LA Sécurité Ne pas mettre d’objets étrangers dans le projecteur Précautions concernant la sécuritéNe pas surcharger la prise de courant Ne jamais tenter de modifier ou de démonter le projecteurIl y a risque d’électrocution ou d’explosion Pendant un orage, ne pas toucher le projecteur ou le câbleNe jamais démonter la lampe Il y a risque d’électrocutionLe bloc lampe risquerait de se casser Ne pas empêcher la chaleur de s’échapperNe pas utiliser la lampe usée Sinon cela peut causer des chocs électriquesPrécautions pour l’utilisation Nettoyage et maintenancePrécautions pour la manipulation Mise au rebutHeures*2 Remplacement de la lampeMoment adéquat pour remplacer la lampe AprèsPoignée Lampe Procédure de remplacement de la lampeLa lampe est chaude si elle vient d’être utilisée Préparez un tournevis Phillips à l’avancePanasonic Canada Inc Panasonic Projector Systems CompanyTechnical Support Phone FAX Mail projectorsupport@us.panasonic.com

PT-DW5100U, PT-D5700U, DW5100UL, PT-D5700UL specifications

Panasonic, a leader in innovative projection technology, offers a range of high-performance projectors including the PT-D5700UL, DW5100UL, PT-D5700U, and PT-DW5100U. These models are designed for environments that require high brightness, excellent color accuracy, and advanced features for seamless integration into various applications.

The PT-D5700UL and PT-D5700U are renowned for their high brightness of up to 7,000 lumens, making them ideal for large venues such as auditoriums, conference rooms, and outdoor events. They utilize a dual-lamp system, which not only enhances brightness but also provides reliability and longevity. The unique Dual Lamp Drive system ensures that if one lamp fails, the other continues to function, minimizing downtime and maintenance concerns.

Both projectors feature a WUXGA resolution of 1920 x 1200, providing sharp, detailed images that are essential for professional presentations. Their RGB booster technology enhances color reproduction, delivering vivid and realistic colors that captivate audiences. Additionally, these models feature a contrast ratio of up to 20,000:1, allowing presentations to have deep blacks and bright highlights, critical for effective visual storytelling.

On the other hand, the DW5100UL and PT-DW5100U models are specifically tailored for applications requiring exceptional brightness and excellent color fidelity, boasting a brightness of 5,000 lumens. They offer WXGA resolution (1280 x 800), making them suitable for a wide variety of display needs in corporate, educational, and entertainment settings. The incorporation of Panasonic’s Daylight View technology significantly enhances visibility even in brightly lit environments.

All four projectors are equipped with advanced connectivity options, including HDMI, DisplayPort, and LAN, allowing for easy integration into existing AV systems. They are also compatible with Crestron and AMX control systems, making them a flexible choice for complex installations.

Furthermore, the projectors utilize Panasonic's proprietary Solid Shine laser technology, which ensures consistent brightness and color quality over time while reducing maintenance requirements. With IP6X-rated dust-proof design and a cooling system that minimizes dust accumulation, users can rely on these projectors to perform optimally in challenging conditions.

In summary, Panasonic’s PT-D5700UL, DW5100UL, PT-D5700U, and PT-DW5100U projectors are engineered to deliver outstanding performance, durability, and versatility. They set a high standard for professional projection systems, equipped with cutting-edge technologies that ensure exceptional visual quality whether for business, education, or entertainment purposes.
Top Page Image Contents