Panasonic PT-D5700UL Raster Position, XGA Mode, Sxga Mode, ENGLISH, DEUTSCH, FRANÇAIS, Español

How to use ADVANCED MENU

Press to select an item, and press to adjust the setting.

Once adjustment is complete, press the MENU button to return to “BRIGHT ADJUST”.

Press to select the part of “UPPER”, “LOWER”, “RIGHT”, “LEFT”.

Use to adjust the width for correcting the “BRIGHT INSIDE” setting (0 to 255).

Press to select “BRIGHT OUTSIDE”. Press the ENTER button.

The “BRIGHT OUTSIDE” adjustment screen will be displayed.

When “INTERLOCKED” is set to “OFF”, individual adjustment of “R”, “G” and “B” will be possible.

RASTER POSITION

When the whole area where the input picture can be displayed is not used, the picture can be moved to any position inside the display area.

: These adjust the value in the horizontal direction.

: These adjust the value in the vertical direction.

XGA MODE

This mode takes effect only when XGA (RGB) signals are input.

XGA : This is the standard setting.

WXGA : Select this mode when WXGA signals are input.

Press to select an item, and press to adjust the setting.

Projection range Edge blending width (right)

BRIGHT adjustment (right)

Marker

	BRIGHT INSIDE BRIGHT OUTSIDE
	Note • The “BRIGHT ADJUST” is a function for
	making the brightening of the bright level
	in those areas where the pictures
	overlap less conspicuous when multi-
	screens have been configured using
	“EDGE BLENDING”. The optimal point is
	where, after the “BRIGHT INSIDE” has
	been adjusted, the compensation
	amount is the same for the bright levels
	in the areas where the pictures overlap
	and where the pictures do not overlap.
	If, after the “BRIGHT INSIDE”
	adjustment, only the vicinity of the
	borders of the areas where the
	pictures overlap and where the
	pictures do not overlap becomes
	bright, proceed to adjust the top,
	bottom, left and right widths.
	Alternatively, if only the vicinity of the
	borders has darkened as a result of
	the width adjustments, proceed with
	the “BRIGHT OUTSIDE” adjustment.
	• When a rear screen or screen with a
	high gain is used, the joints may
	appear to be discontinuous depending
	on the viewing position.
	• When any setting other than “OFF”
	has been selected for “EDGE
34	BLENDING”, the “AI” is not adjustable.

SXGA MODE

This mode takes effect only when SXGA (RGB) signals are input.

SXGA : This is the standard setting.

SXGA+: Select this when the screen is cut off.

Changing the display language

DISPLAY LANGUAGE

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

日本語

中文

SELECT

SET

Menus, setting items, adjustment screens, and control button names will be displayed in the language the user chooses.

The available languages are:

ENGLISH, DEUTSCH, FRANÇAIS, ESPAÑOL,

ITALIANO, , , , .

Note • The projector’s on-screen display is set to the English language by default.