Panasonic TH-65PB2W, TH-50PB2W operating instructions Picture Adjustments

Picture Adjustments

1 Press to display the Picture menu.

2Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

Picture								Press “ ” or “ ” button to switch between modes.
					Normal			Normal	Dynamic
Normalise
								Monitor	Cinema
Picture Mode							Normal
Contrast							25	Normal
Brightness							0
								For viewing in standard (evening lighting) environments.
Colour							0
								This menu selects the normal levels of Brightness
Hue							0
Sharpness							5	and Contrast.
White balance							Normal
								Dynamic
Advanced				settings
								For viewing in brighter environments.
								This menu selects higher than normal levels of
								Brightness and Contrast.
								Cinema
								For use in viewing tone-focused pictures with
						Press to enter		brightness reduced.
						Advanced settings.		Monitor
								For use when creating broadcast or movie content.
Advanced settings								With this picture, even if the overall average picture
Enables fine picture adjustment at a professional								level (APL) changes, the brightness of areas with
								the same signal level does not change.
level (see next page).
								Picture Mode during Touch Pen mode
	Advanced settings							Only “Normal” or “Dynamic” can be selected in
			Normalise Normal					Picture Mode during Touch Pen mode.
								Notes:
		Black extension					0
		Input level					0	• When “Monitor” is selected in Picture Mode, the
		Gamma					2.2
								following menu items cannot be set.
		W/B High R					0
								Extended life settings: Peak limit (see page 40)
		W/B High G					0
		W/B High B					0	• If you would like to change the picture and colour of
		W/B Low R					0	the selected Picture menu to something else, adjust
		W/B Low G					0	using the items in the Picture menu. (see next page)
		W/B Low B					0
								Press “ ” or “ ” button to switch between modes.
								Normal (9300K)	Cool (11500K)	Warm (6500K)

Helpful Hint ( /

Normalise

Normalisation)

While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

26