Panasonic TH-65PB2W, TH-50PB2W Set Touch Panel mode to On Select Adjust, Calibration mode

Page 56

Options Adjustments

Touch Panel settings (Settings when using Touch Panel)

The mode to restrict NANODRIFT Saver (see page 40) operation when using Touch Panel (available as an option) is set up.

Options

1/3

Weekly Command Timer

Audio input select

Touch Panel settings

Press ACTION () button

Touch Panel settings

Touch Panel mode

On

Calibration mode

Set “Touch Panel mode” to “On”.

1select

2adjust

Calibration mode

This setting is used in calibrating a touch panel.

You can conﬁgure the setting if “Touch Panel mode” is “On”.

Select “Calibration mode” and then press .

Touch Panel settings
Touch Panel mode	On
Calibration mode
ª

1 select

2 set

When the menu is not displayed (normal screen)

Hold down for over 3 seconds.

Calibration mode

The screen is displayed in the middle and NANODRIFT is deactivated for 180 seconds.

After 180 seconds or when you have the menu displayed with a remote control, Calibration mode is cancelled.

Note:

For information on how to set up Calibration, please see Touch Panel instruction manual.

56

Image 56

Contents Operating Instructions Display Operations Table of Contents Trademark Credits Important Safety NoticeImportant Information Safety Precautions SetupDo not place any objects on top of the Plasma Display Transport only in upright positionIf problems occur during use Safety PrecautionsWhen using the Plasma Display Electric shocks can result if this is not done Do not burn or breakup batteriesRemote Control Batteries AccessoriesAccessories Supply Connections AC cord connection and ﬁxing, cable ﬁxingConnections Speaker connectionVideo equipment connection Video and Component / RGB in connection DVI-D Input Connector Signal NameHdmi connection DVI-D in connectionSignal Names for Mini D-sub 15P Connector PC Input Terminals connectionCommand Serial Terminals connectionComputer Communication parametersPower On / Off Starting up the networkPower On / Off Selecting the input signal PC Network Whiteboard Video COMPONENT* Hdmi DVIPC Network Whiteboard Slot Input Video Component Hdmi DVI Slot Input Input terminal in Terminal BoardRemote control sensor Input button Input signal selection seeBasic Controls Brightness SensorECO Mode ECO Basic ControlsAll Aspect mode Aspect ControlsDigital Zoom Using Two Screen Display Multi PIP SettingsPIP Mode On-Screen Menu Displays Auto mode Adjusting Pos./SizeUsing Remote Control Adjusting Pos./Size Adjust so that any such noise is minimizedClamp Position During Component/PC input signal Optimum value for Clamp Position adjustmentIs adjusted as follows For 2k1k signals 2k1kPicture Adjustments Advanced settings Picture AdjustmentsPicture Proﬁles MY Picture MEMORY1Saving proﬁles Picture ProﬁlesExample Specifying MY Picture Select All deleteLoading proﬁles Editing proﬁlesDeleting proﬁles Renaming proﬁlesSound Adjustment SDI Sound OutputSetup menu screen Setup menuNetwork Setup On/Off Timer Setup Day/Time Setup / On/Off Timer SetupDay/Time Setup Touch-Pen Settings Slot Input NetworkTouch-Pen Settings Standby pen charging modePairing UnpairingMulti PIP Settings Multi PIPMode selection Start settingScreensaver For preventing image retention Function selectionSetup of Screensaver Time Screensaver For preventing image retentionExtended life settings Picture Mode ContrastReduces screen image retention Image Retention Reduction MenuExpress settings Nanodrift ModeReduces screen image retention Nanodrift SaverCustom settings ResetAdjust Set each menu SelectECO Mode settings ECO ModeCustomizing the Input labels Function Button Settings Input SLOT* Input WhiteboardNo activity power off Menu Display Duration / OSD BrightnessOSD Language Display orientationSetup for Input Signals Component / RGB-in selectYUV / RGB-in select Component RGBSignal menu Setup for Input SignalsSetting RGB sync signal Setting Component sync signalSync SDI ThroughInput signal display Noise reductionAdvanced NR Sets the three NR functions separatelyOptions Adjustments Press for more than 3 seconds. Press to select OptionsOptions Adjustments Input lock SeeStudio Gain Weekly Command Timer NormalisationPress to select a command number Press to select Command NoCommand setting screen Press to select Time / CommandAudio input select Set Touch Panel mode to On Select Adjust Calibration modeWhen the menu is not displayed normal screen Hold down for over 3 secondsInput Search Input SearchPC Network Slot Input Video Component Hdmi DVI Primary Input, Secondary InputTroubleshooting Plasma Display panelList of Aspect Modes 149Applicable Input Signals Mark Applicable input signalVideo input Video Applicable Input SignalsShipping condition Command list of Weekly Command Timer Speciﬁcations TH-50PB2W TH-65PB2WThis product incorporates the following software Customer’s Record