Panasonic TH-65PB2W Sync, Setting RGB sync signal, Setting Component sync signal, SDI Through

Page 48

Setup for Input Signals

• Sync

This function operates only during input from PC IN terminal.

Setting RGB sync signal

Conﬁrm that the input is set to RGB input (this setting is valid only for RGB input signal).

Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.

on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

Setting Component sync signal

Conﬁrm that the input is set to Component input (this setting is valid only for Component input signal).

Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.

on Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.

Note:

Signals input to COMPONENT/RGB IN terminals correspond to Sync on G or Sync on Y.

• SDI Through

Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).

On Off

On: Enables active through.

Off: Disables active through.

Note:

Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB11DHD) is selected.

• HDMI Range

Switches the dynamic range according to the input signal from HDMI terminal.

Video(16-235) Full(0-255) Auto

Video(16-235):If the input signal is the video range, Example: HDMI terminal output for DVD player

Full(0-255):If the input signal is full range, Example: HDMI terminal output for personal computer

Auto: Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.

Note:

This function can be set only for HDMI signal input.

48

Image 48

Contents Operating Instructions Display Operations Table of Contents Important Safety Notice Important InformationTrademark Credits Safety Precautions SetupDo not place any objects on top of the Plasma Display Transport only in upright positionSafety Precautions When using the Plasma DisplayIf problems occur during use Electric shocks can result if this is not done Do not burn or breakup batteriesAccessories Accessories SupplyRemote Control Batteries Connections AC cord connection and ﬁxing, cable ﬁxingSpeaker connection Video equipment connectionConnections Video and Component / RGB in connection DVI-D Input Connector Signal NameHdmi connection DVI-D in connectionSignal Names for Mini D-sub 15P Connector PC Input Terminals connectionCommand Serial Terminals connectionComputer Communication parametersPower On / Off Starting up the networkPower On / Off Selecting the input signal PC Network Whiteboard Video COMPONENT* Hdmi DVIPC Network Whiteboard Slot Input Video Component Hdmi DVI Slot Input Input terminal in Terminal BoardRemote control sensor Input button Input signal selection seeBasic Controls Brightness SensorECO Mode ECO Basic ControlsAll Aspect mode Aspect ControlsDigital Zoom Multi PIP Settings PIP ModeUsing Two Screen Display On-Screen Menu Displays Adjusting Pos./Size Using Remote ControlAuto mode Adjusting Pos./Size Adjust so that any such noise is minimizedClamp Position During Component/PC input signal Optimum value for Clamp Position adjustmentIs adjusted as follows For 2k1k signals 2k1kPicture Adjustments Advanced settings Picture AdjustmentsPicture Proﬁles MY Picture MEMORY1Saving proﬁles Picture ProﬁlesExample Specifying MY Picture Select All deleteLoading proﬁles Editing proﬁlesDeleting proﬁles Renaming proﬁlesSound Adjustment SDI Sound OutputSetup menu Network SetupSetup menu screen Day/Time Setup / On/Off Timer Setup Day/Time SetupOn/Off Timer Setup Touch-Pen Settings Slot Input NetworkTouch-Pen Settings Standby pen charging modePairing UnpairingMulti PIP Settings Multi PIPMode selection Start settingScreensaver For preventing image retention Function selectionSetup of Screensaver Time Screensaver For preventing image retentionExtended life settings Picture Mode ContrastReduces screen image retention Image Retention Reduction MenuExpress settings Nanodrift ModeReduces screen image retention Nanodrift SaverCustom settings ResetAdjust Set each menu SelectECO Mode settings ECO ModeCustomizing the Input labels Function Button Settings Input SLOT* Input WhiteboardNo activity power off Menu Display Duration / OSD BrightnessOSD Language Display orientationSetup for Input Signals Component / RGB-in selectYUV / RGB-in select Component RGBSignal menu Setup for Input SignalsSetting RGB sync signal Setting Component sync signalSync SDI ThroughInput signal display Noise reductionAdvanced NR Sets the three NR functions separatelyOptions Adjustments Press for more than 3 seconds. Press to select OptionsOptions Adjustments Input lock SeeStudio Gain Weekly Command Timer NormalisationPress to select a command number Press to select Command NoCommand setting screen Press to select Time / CommandAudio input select Set Touch Panel mode to On Select Adjust Calibration modeWhen the menu is not displayed normal screen Hold down for over 3 secondsInput Search Input SearchPC Network Slot Input Video Component Hdmi DVI Primary Input, Secondary InputTroubleshooting Plasma Display panelList of Aspect Modes 149Applicable Input Signals Mark Applicable input signalApplicable Input Signals Shipping conditionVideo input Video Command list of Weekly Command Timer Speciﬁcations TH-50PB2W TH-65PB2WThis product incorporates the following software Customer’s Record