Options Adjustments
Input Search
When a signal is not detected, another input with a signal is automatically selected.
Options | 1/3 |
Weekly Command Timer
Audio input select
Touch Panel settings
Input Search
Press ACTION (
) button
Input Search |
|
Input Search | Off |
Primary Input |
|
Secondary Input |
|
1 select
2 adjust
Input Search
Off: When there is no signal, the input is not switched automatically.
All Inputs: Searches all inputs and switches to an input with a signal.
Input search is executed in the following order. (Example) When the current input is PC
PC 
NETWORK SLOT INPUT VIDEO COMPONENT HDMI DVI
Priority: Searches “Primary Input” and “Secondary Input” in order and switches to an input with a signal.
Searching...
“Searching...” is displayed during the input search.
Primary Input, Secondary Input
Set the input to search when “Priority” is selected.
(NONE) 
SLOT INPUT* 
VIDEO 
COMPONENT 
HDMI 
DVI 
PC 
NETWORK
*“SLOT INPUT” is displayed when an optional Terminal Board is installed.
When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” are displayed.
Notes:
•This menu is available only when “Input lock” is “Off”. (see page 51)
•If the input is changed by this function, the last input is selected when the power is turned on next time. If you wish to retain the original input when the power is turned on, set “Initial input” to the original input. (see page 50)
57