Panasonic TH-50PB2W, TH-65PB2W Touch-Pen Settings, Standby pen charging mode, Pairing, Unpairing

Touch-Pen Settings

Standby pen charging mode

Sets the power supply for the electronic pen charging terminal (CHARGE, MEMORY/(CHARGE)) in the standby mode (power OFF with remote control).

Off: Turns off the charging terminal power in the standby mode.

On[4hrs]: Turns ON the charging terminal power for 4 hours after entering standby mode.

On: Leaves the charging terminal power ON in standby mode so that the pen can be charged.

Pairing

Registers an electronic pen to electronic pen adapter.

Up to four electronic pens can be registered for an electronic pen adapter.

For the details of the pairing, please refer to “Operating Instructions, Electronic Pen Operations”.

Note:

Make sure the electronic pen adapter is connected to the display.

If no electronic pen has been registered, the screen of procedure 3 appears first. Follow the instructions on the screen to register an electronic pen.

1

2

3

Select “Pairing” in “Touch-Pen Settings” and press button.

Select “Pairing” and press button.

Pairing Tool

Pairing

Unpairing All

Close

While pressing both the remote drawing and the remote clearing buttons of the electronic pen, press the Power switch.

To cancel the paring, select “Cancel”.

Pairing in progress

Set the electronic pen that you want to pair as pair-enabled and then move it closer to the electronic pen adapter. For details, refer to the procedure for registering electronic pens in the operating instructions for the electronic pen.

Cancel

4

5

When the electronic pen paring is completed,

select “Return” and press button.

Pairing Tool

Pairing was successful.

Return

Select “Close” and press button.

Pairing Tool

Pairing

Unpairing All

Close

[Unpairing]
Unpairs all paired electronic pens.
1	Select “Unpairing All” in “Pairing Tool” and press					button.
2	Select “Yes” and press				button.
		Pairing Tool
			Do you want to cancel all pairings?
		No
				Yes

35