Options Adjustments
1
2
Press to display the Setup menu. Press to select “OSD Language”.
Options | 1/3 |
Weekly Command Timer
Audio input select
Touch Panel settings
Input Search
Onscreen display |
| On |
Initial input |
| Off |
Initial VOL level | Off | 0 |
Maximum VOL level | Off | 0 |
3
Press for more than 3 seconds. Press to select “Options”.
Options
Input lock | Off |
Button lock | Off |
Remocon User level | Off |
4
5
Shipping
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
Options | 2/3 |
| Enable |
|
|
|
|
Initial Power Mode | Normal |
|
|
|
|
ID select | 0 |
|
|
|
|
Serial ID | Off |
|
|
|
|
Display size | Off |
|
|
|
|
Studio W/B | Off |
|
|
|
|
Studio Gain | Off |
| Options | 3/3 |
|
| Slot power | Off | |
| Power On Screen Delay | Off | |
| Clock Display | Off |
|
| All Aspect | Off | |
| Auto Setup | Manual | |
| Rotate | Off | |
Power On Message (No activity power off) On
Power On Message (Power Management)
On
Item |
|
|
| Adjustments |
|
|
|
| ||
Weekly Command Timer | Sets Weekly Command Timer. (see page 53) |
|
|
|
|
| ||||
Audio input select | Set up the sound when an image input is selected. (see page 55) |
|
|
| ||||||
Touch Panel settings | Set while using Touch Panel (available as an option). (see page 56) |
|
|
| ||||||
Input Search | Set auto input switching for when there is no signal. (see page 57) |
|
|
| ||||||
| On: Displays all the following on screen. |
|
|
|
|
| ||||
| • Power on display |
|
|
|
|
|
|
| ||
Onscreen display | • Input signal switch display |
|
|
|
|
|
| |||
• No signal display |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |||
| • Mute and the remaining time of | was pressed. |
|
|
| |||||
| Off: Hides all the items above from view. |
|
|
|
|
| ||||
| Adjusts the input signal when the unit is turned on. | DVI | PC | NETWORK | WHITEBOARD | |||||
| Off | SLOT INPUT*1 | VIDEO | COMPONENT*2 | HDMI | |||||
| *1 “SLOT INPUT” is displayed when an optional Terminal Board is installed. |
| ||||||||
Initial input |
| When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” are displayed. | ||||||||
*2 “COMPONENT” may be displayed as “RGB” depending on the setting of | ||||||||||
| ||||||||||
| Notes: |
|
|
|
|
|
|
| ||
•Only the adjusted signal is displayed. (see page 16)
•This menu is available only when “Input lock” is “Off”.
Press 
button to adjust the volume when the unit is turned on.
| Off | On |
| Off: Sets normal volume. | |
Initial VOL level | On: Sets your preferred volume. | |
| Notes: |
|
•When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.
•You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Press |
|
|
|
|
| button to adjust the maximum volume. |
|
|
|
|
| ||
Off |
| On | ||||
Off: Sets auto maximum volume. | ||||||
On: Sets your preferred maximum volume. | ||||||
Maximum VOL level Notes: |
|
|
|
|
|
|
•If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically becomes the same as the “Maximum VOL level”.
•The volume display can go up to 63 regardless of the settings.
•You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.
50