HDMI (High Definition Multimedia Interface) input connection
About HDMI
HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standard, enhanced and high definition video format as well as existing
video and audio information. The HDMI/HDCP1 input can
be connected to an EIA/CEA 8612 compliant consumer electronic device, such as a set top box or DVD player equipped with a HDMI or DVI output connection. By inputting a
Notes:
1.HDMI/HDCP = High Definition Multimedia Interface /
2.
Compatible formats
This PTV is compatible with following formats. Please set the connecting device to following format.
Video signal
|
|
|
|
|
| Format | No of dots | Vertical scanning |
|
| frequency (Hz) |
| ||
|
|
|
| |
|
|
|
|
|
| 1080i | 1920 x 1080i | 59.94 / 60 |
|
|
|
|
|
|
| 540p (480p) | 720 x 480p | 59.94 / 60 |
|
| 640 x 480p | 59.94 / 60 |
| |
|
|
| ||
|
|
|
|
|
| 540p (480i) | 720 x 480i | 59.94 / 60 |
|
|
|
|
|
|
|
|
|
|
|
Audio signal
When digital audio is included in the HDMI connection, the compatible sampling frequencies are 48 KHz / 44.1Khz / 32 Khz.
OPTIONAL EQUIPMENT CONNECTIONS
Connection diagram
Follow the diagram below to connect the PTV to a set top box or a DVD player.
ANT A |
|
|
|
|
|
|
|
|
|
Cable In |
|
|
|
|
|
|
|
|
|
Incoming |
|
|
|
|
|
|
|
|
|
Cable |
|
|
|
|
|
|
|
|
|
ANT B |
| TERMINALS ON BACK OF PROJECTION TELEVISION |
| ||||||
|
| VIDEO |
|
|
|
|
|
|
|
CableCARDTM | HDMI | Y |
|
|
|
|
|
|
|
INTERFACE |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
SERVICE | AV IN | PB |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
ONLY |
| PR |
|
|
|
|
| VIDEO | ENGLISH |
|
|
|
|
|
|
| |||
DIGITAL AUDIO OUT |
| L |
|
| L |
| HDMI | ||
|
|
|
|
|
|
| L |
| |
|
| R |
|
|
|
|
| R |
|
| L | 1 | 2 |
|
|
|
|
|
|
| AUDIO COMPONENT | INPUT | INPUT | INPUT | PROG | TO AUDIO |
| ||
|
| VIDEO INPUT | 1 | 2 | 3 | OUT | AMP |
| |
| AUDIO IN |
|
|
|
|
|
|
|
|
| R |
|
|
|
|
|
|
|
|
|
|
|
|
|
| AUDIO | OUT |
| |
CABLES NOT SUPPLIED |
|
|
|
|
|
| |||
|
|
|
|
|
| OUT |
|
|
|
|
|
|
|
| R |
|
|
|
|
EXTERNAL DIGITAL
COMPONENT
*The connector on the PTV is HDMI Type A connector.
Procedure
•Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the PTV.
•Press TV/VIDEO button on the remote control to select HDMI input. The connector on the PTV is HDMI Type A connector.
•If the external device has DVI output only, use a DVI to HDMI adaptor cable*3 to connect to the HDMI jack on the PTV. Also, connect the Audio Out signal from the external device (set top box or DVD player) to the Audio In*4 jacks below the HDMI input.
•If you cannot display the picture because of your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the
Notes:
*3.
*4. Please refer to pages 22 and 23 for Audio setting detail.
9z