Panasonic PT 47WXD64 Photo Viewer Operations, Photo Viewer Setup Menu, Error messages

MENU OPERATIONS

Photo Viewer™ Operations (Cont.)

Photo Viewer™ Setup Menu

This menu allows you to customize features in the Photo Viewer™ Setup menu.

Procedure

•Highlight Photo Viewer™ icon and press OK button to display the thumbnail screen.

•Press the SD button on the remote control to display the Setup screen.

•	Use the CH			,	VOL or VOL			keys to navigate in
	the setup menu.
	100-001						0001/0066
		Setup Menu				Return
		Slide Show				Start
			Interval			5Sec
			Sequence			Order
			Repeat			OFF
		Rotate				Left
		Card				SD
				SELECT		OK
				CHANGE
						EXIT
				Date			: 07/04/2002
				Pixel			: 1600 x 2000

ˆSlide Show - Allows you to start the slide show by pressing the OK button while Start is highlighted. Press OK button to stop the Slide Show.

Note: When you are in the Slide Show mode, you can change the Aspect of the image on screen by pressing the ASPECT button on the remote control.

ˆInterval - Allows you to change the length of time that a slide is being displayed on screen. Available settings are: 5sec, 10sec, 15sec, 30sec, 60sec, 90sec and 10 minutes.

ˆSequence - Select either Order or Random.

ˆRepeat - Select Off or On.

Note: After setting Interval, Sequence or Repeat, press CH button to select Start, then press OK to start the Slide Show.

ˆRotate - Allows you to rotate the image.

ˆZoom - Lets you select the magnification of the Single Slide display.

Procedure

•While in the Single Slide display mode, press SD button to display Photo Viewer™ Setup Menu. Zoom option will be displayed in the Setup Menu.

•Highlight Zoom and press OK button.

• Press VOL or VOL button to select To Fit, x2 or x4.

•Press OK button. To move the image in the picture frame, press the navigation buttons.

•Press OK to view the slide in normal magnification.

ˆCard - Select either SD or PC when both cards are inserted in the slots.

Following are some of the error messages that may be displayed on-screen when certain conditions are not met or exceeds the Photo Viewer™ specifications.

Error messages

Error condition		Error messages displayed
			on-screen
When inserting Card	No card or Card is not inserted
	correctly
If the JPEG file is corrupted	This type of image is not supported.
and cannot be decoded.
If the card is not formatted with	This type of format is not supported.
FAT 12 or FAT 16 or if it is not
DCF standard.
If thumbnail and main picture			This icon will appear where
cannot be shown
			thumbnail image will.
Over 3000 image files	Photo Viewer™ cannot support over
	3000 JPEG files.
Resolution over	Photo Viewer™ cannot support over
	8192 x 8192 pixels.
If incompatible card is inserted	This type of card is not supported.

Photo Viewer™ Troubleshooting
Symptoms	Solutions
	A) Not compatible format. Must be
	formatted with FAT 12 or FAT 16.
	B) The extension is not “JPG”.
Cannot read the content of	Photo Viewer™ can display EXIF
	standard JPEG file, and JPEG
the card
	file which is not EXIF standard
	cannot be shown.
	C) The folders not under DCF
	standard.
PC card cannot be ejected	Push the card all the way in, and
	eject.
	If the main image cannot be read
Poor picture quality	(the file is partially corrupted), the
	Photo viewer™ will read the
	thumbnail. Please confirm the
	format of the image.
Long time to display	It will take long time to display, if
	there are lots of images or if the file
	size is big.

Notes:

•If thumbnail screen or a single slide image is displayed for longer than 10 minutes, Image shift (refer to page 26) feature will be activated to prevent image retention. The image on-screen will zoom-in and zoom-out in 4 (four) steps.To exit this mode, press OK button or select another slide or press any button.

•During the Slide show, the Image shift feature will activate if the image is displayed longer than 5 (five) minutes. The image will be shifted horizontally (left or right) in minute increments. Image shift feature will not activate, if it is turned Off.

ENGLISH

25z