Channel and Program Tuning

SPECIAL FEATURES OF THE HIGH DEFINITION PROJECTION TELEVISION

Special Features of the High Definition Projection Television

Channel and Program tuning in digital television is different from current conventional television. In DTV, multiple programs can exist within a single 6MHZ channel. These channels behave as sub-channels within a single channel. When tuning to a digital channel, the HDTV Projection Television will also tune to a program. The HDTV Projection Television will indicate the channel and program using the on-screen Channel Banner display.

Note: In order to select channels properly, Auto Scan must be performed (refer to page 25).

Tuning digital and analog channels

You can tune the digital and analog channels in the following ways:

Direct tuning (0 - 9 keys) - using the numeric keys on the
Remote control to directly input the Channel number. If
necessary, use the	button to enter the program number of

Channel Banner: Minimized

The minimized Channel Banner will display the antenna input, channel number, and the station identification (if available).

A:15-1

KPBS-HD

Channel Banner: Maximized

Press the RECALL button to display the maximized channel banner. While the channel banner is displayed, you can add the channel to Favorite channel list or delete the channel from the Favorite channel list.

Antenna designation,	Rating		Picture mode	PIP/SPLIT CH# or
Channel and program #
	indication	Signal Format			Clock
and Station identifier			setting	Input information

ENGLISH

the digital channel.

Channel Up/Down Tuning (CH or CH buttons) - Tunes to the next or previous available channel or program. The Channel Up/Down tuning depends upon the surfing mode (see pg. 21) you have set in the Channel menu.

Rapid Tuning (R-TUNE) - Switches between the last two channels or programs.

A:15-1

KPBS - HD

Add FAV

Add FAV or Del FAV button

TV-G		1080i		12:30 pm
		1080i	HDMI
		VIVID	HDMI
CC	SAP	FULL		30

Closed Caption and		Program Aspect		Time remaining
Closed Caption and		Program Aspect		in Sleep Timer
SAP indication				in Sleep Timer
SAP indication

Audio Track 1 of 1 (English)

Audio Track of digital channel

Direct Tuning Method

Follow the procedure below to directly enter the channel number using the Remote Control numeric keys.

Procedure

•Press the numeric keys on the Remote Control to enter the Channel number. Press OK button.

•If tuning a digital channel and your channel contains

more than one program, press the button and enter the program # (1, 2, 3 etc.) using the numeric keys. Press OK button. The following is an example of tuning to channel 15-1.

Direct Tuning Example


Step	Action	Channel Banner
Step	Action	Display
		Display


1	Press 1	1

2	Press 5	15

3	Press	15-
	Press

4	Press 1	15-1

5	Press OK	15-1

The HDTV Projection Television will tune to channel 15-1.

Add Fav / Del Fav feature

This feature lets you add channels to Favorite channel list or delete channels from Favorite channel list.

Procedure

•Tune the desired the channel to be added or deleted.

•Press the RECALL button to display the Channel Banner.

•Press the OK button to execute your choice.

Emergency Alert System (EAS) Forced Tuning

If a CableCARD™ module is installed, the cable MSO (multiple system owner/operator) may provide an Emergency Alert System message. These messages are intended to alert the general public of important local or national emergency situations. In the event of receipt of one of these messages, the HDTV Projection Television shall immediately tune to the channel as directed by the EAS message. If the channel has blocked using the parental control, the parental blocking has priority over the forced tune.

13z