Panasonic WJ-RT416 manual Check the status of the camera

Page 16

Step 4

Click the [OK] button.

The connection status window will be displayed. When the connection is established, images from the selected camera will be displayed in the selected area in the image display area.

Switch the image display area between a single screen and a multi-screen

Display images on a single screen in the image display area

Click the desired area selection button.

The selected area will be displayed on a single screen in the image display area. The image display area will be switched to a single screen by clicking one of the area selection buttons when a multi-screen is displayed in the image display area.

The area selection buttons will change as follows to indicate the current status.

(a) : This area is displayed in the image display area and currently selected.

(b) : This area is displayed in the image display area and currently not selected.

(c) : This area is not displayed in the image display area, or currently being used for the sequential display.

Display images on a multi-screen in the image display area

Click the desired multi-screen selection button.

The selected multi-screen will be displayed in the image display area.

(4-screen): Each time this button is clicked, the displayed area will change as follows. 1 - 4 5 - 8 9 - 12 13 - 16 1 - 4 ···

(6-screen): Each time this button is clicked, the displayed area will change as follows. 1 - 6 7 - 12 1 - 6 7 - 12···

(9-screen): Areas 1 - 9 will be displayed in the image display area.

(16-screen): Areas 1 - 16 will be displayed in the image display area.

Check the status of the camera

The status of the camera respective to the area can be check with the displayed icon.

(No icon): Displaying of live images or playback of recorded images are available in this area.

: Live images from the camera are being displayed in this area. When this icon is blinking, images in the sequential display are being displayed in this area.

: Recorded images are being played in this area.

16

Image 16
Contents Operating Instructions Contents Disclaimer of Warranty Limitation of LiabilityRT4Client PrefaceRT4Viewer System Requirements for a PC Uninstallation of the monitoring software InstallationStep Start the RT4Client Operation windowRecorder control buttons Error/alarm display areaSystem control buttons Time and date display area Recorder information display areaRecorder name Camera StateError Info Alarm InfoUser Info Configure the network settings of the recorder Configure the Network SettingsConfigure the network settings of a PC Control panel will be displayed Local Area Connection Status window will be dis- played Settings relating to the connection with the recorder Monitor Live Images Check the status of the camera Display images on a single screen in the image display areaControl the cameras Disconnect the connection with cameraLogin to the recorder Play recorded images on the recorder Filtering CameraStart/End Start Screenshot Stop playback Control panel Display the control panelClose the control panel Save the image currently being displayed on the PCMuting audio Capture the images currently being displayedDisplay images from the camera on a full screen Preset position Zooming Focusing Cdab Brightness, auto function Operations during playback Other available operations when displaying live images Frame displayScreenshot Step Sequential display Favorite Display Map display Recorder operation Recording/Event Setup Setup Recording/Event Setup Communication Setup Setup Communication SetupNTP Server Address Time AdjustmentRefresh Interval Check of each log of the recorder Log Screenshot Reboot of the recorder Maintenance Reboot Download the setup data Upload the setup dataDownload the language data Step Download recorded images from the recorder Remote Talk Recorder Setup Monitor System Config Recorder Setup Monitor System Info Recorder InfoAdd a recorder to the monitoring system Edit the recorder informationScreenshot Configure the settings relating to the sequential display Map Setup Monitoring System Config Map Setup Screen ModeOut Sequence Cameras Total TimeMap will be created Advanced Setup Monitoring System Config Advanced Setup Subtitle SetupAlarm Sound Setup Default OnMonitor System Version LanguageStart the RT4Viewer FileTool LanguageOriginal playback speed button Reset the adjusted HelpImage display area Playback list display areaPlayback downloaded recorded images Select Channel Search and playTime Range Alteration check Troubleshooting Symptom Cause/solutionSymptom For business users in the European Union
Related manuals
Manual 80 pages 18.29 Kb