Panasonic WJ-RT416 Map Setup Monitoring System Config Map Setup, Out Sequence Cameras, Total Time

Page 48

Setup items

Out Sequence Cameras

In Sequence Cameras

To not use a specified camera for the sequential dis- play, select the camera not to be used, and then click the [<] button. To not use all the cameras for the sequential display, click the [<<] button.

To use the camera in the "Out Sequence Cameras" list for the sequential display, select the camera in the "Out Sequence Cameras" list, and then click the [>] button.

To use all of the cameras in the "Out Sequence Cameras" list for the sequential display, click the [>>] button.

Total Time

Set the total time of the sequential display to 0 - 999 minutes. When "0" is entered, the sequential display will not stop until manually stopped.

The default is 30 minutes.

Dwell Time

Set the dwell time (interval of switching from a camera channel to the next camera channel) to 15 - 999 sec- onds.

The default is 60 seconds.

Screen Mode

Select a screen mode to be used for the sequential dis- play from 1, 4, 9 and 16.

The default is 4 (4-screen).

Map Setup (Monitoring System Config – Map Setup)

Set a map (diagram of the camera location arrangement) used for the map display.

When remotely operating the recorder, the map offers a visual way of understanding the camera locations.

Screenshot 1

Select "Map Setup" under "Monitor System Config" from the pop-up menu (page 44).

The "Map Setup" window will be displayed.

Step 1

Click the [Insert] button and enter a name in the "Name" box.

Then, select the cameras to be displayed on the map. When the checkbox of the recorder name is checked, all of the cameras connected to the recorder will be select- ed.

To select independently, select them on the following window to be displayed when the [Detail] button is clicked. After selecting the cameras to be displayed on the map, click the [OK] button.

48

Image 48
Contents Operating Instructions Contents Disclaimer of Warranty Limitation of LiabilityPreface RT4ClientRT4Viewer System Requirements for a PC Installation Uninstallation of the monitoring softwareStep Start the RT4Client Operation windowError/alarm display area Recorder control buttonsSystem control buttons Time and date display area Recorder information display areaRecorder name Camera StateAlarm Info Error InfoUser Info Configure the Network Settings Configure the network settings of the recorderConfigure the network settings of a PC Control panel will be displayed Local Area Connection Status window will be dis- played Settings relating to the connection with the recorder Monitor Live Images Check the status of the camera Display images on a single screen in the image display areaControl the cameras Disconnect the connection with cameraLogin to the recorder Play recorded images on the recorder Camera FilteringStart/End Start Screenshot Stop playback Control panel Display the control panelClose the control panel Save the image currently being displayed on the PCCapture the images currently being displayed Muting audioDisplay images from the camera on a full screen Preset position Zooming Focusing Cdab Brightness, auto function Operations during playback Other available operations when displaying live images Frame displayScreenshot Step Sequential display Favorite Display Map display Recorder operation Recording/Event Setup Setup Recording/Event Setup Communication Setup Setup Communication SetupTime Adjustment NTP Server AddressRefresh Interval Check of each log of the recorder Log Screenshot Reboot of the recorder Maintenance Reboot Download the setup data Upload the setup dataDownload the language data Step Download recorded images from the recorder Remote Talk Recorder Setup Monitor System Config Recorder Setup Monitor System Info Recorder InfoAdd a recorder to the monitoring system Edit the recorder informationScreenshot Configure the settings relating to the sequential display Map Setup Monitoring System Config Map Setup Screen ModeOut Sequence Cameras Total TimeMap will be created Advanced Setup Monitoring System Config Advanced Setup Subtitle SetupAlarm Sound Setup Default OnMonitor System Version LanguageStart the RT4Viewer FileTool LanguageOriginal playback speed button Reset the adjusted HelpImage display area Playback list display areaPlayback downloaded recorded images Search and play Select ChannelTime Range Alteration check Troubleshooting Symptom Cause/solutionSymptom For business users in the European Union
Related manuals
Manual 80 pages 18.29 Kb