Panasonic WJ-RT416 manual System Requirements for a PC

Page 5

System Requirements for a PC

It is recommended to install this software on a PC that meets the following system requirements. If installing on a PC that does not meet the following system requirements, it may cause problems such as slow imaging or the software becomes inoperable.

OS

Microsoft® Windows® XP Professional SP2*

 

Microsoft® Windows® XP Home Edition SP2*

 

*: Tested and confirmed full compatibility with the English edition. Full compatibility

 

with other language editions cannot be guaranteed.

Computer

IBM PC/AT Compatible

CPU

Pentium® 4 3.0 GHz or faster

Memory

512 MB or more

Graphic memory

256 MB or more

Display driver

Overlay compatible

Monitor

1 024 x 768 pixels or more, 24-bit True color or better

Network Interface

10/100 Mbps Network interface card must be installed

Others

DirectX 8.0a or later

 

CD-ROM Drive: It is necessary to read the operating instructions and use the soft-

 

ware on the provided CD-ROM.

 

Adobe® Reader: It is necessary to read the operating instructions on the provided

 

CD-ROM.

Notes:

When the graphic memory is less than 32 MB, the monitoring software can access only four camera channels concurrently. (When the graphic memory is less than 64 MB, the monitoring software can access only six camera channels concurrently.)

When the overlay control is not enabled for the display driver, the monitoring software may not start.

The monitoring software may not start depending on the version of the display driver. In this case, upgrade the display driver to the latest version.

Trademarks and Registered Trademarks

Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Microsoft, Windows and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Intel® and Pentium® are trademarks of Intel Corporation.

Other names of companies and products contained in these operating instructions may be trademarks or regis- tered trademarks of their respective owners.

Abbreviations

The following abbreviations are used in these operating instructions.

Microsoft® Windows® XP Professional SP2 and Microsoft® Windows® XP Home Edition SP2 are described as Windows XP.

5

Image 5
Contents Operating Instructions Contents Limitation of Liability Disclaimer of WarrantyRT4Viewer PrefaceRT4Client System Requirements for a PC Step InstallationUninstallation of the monitoring software Operation window Start the RT4ClientSystem control buttons Error/alarm display areaRecorder control buttons Recorder information display area Time and date display areaRecorder name Camera StateUser Info Alarm InfoError Info Configure the network settings of a PC Configure the Network SettingsConfigure the network settings of the recorder Control panel will be displayed Local Area Connection Status window will be dis- played Settings relating to the connection with the recorder Monitor Live Images Display images on a single screen in the image display area Check the status of the cameraDisconnect the connection with camera Control the camerasLogin to the recorder Play recorded images on the recorder Start/End CameraFiltering Start Screenshot Stop playback Display the control panel Control panelClose the control panel Save the image currently being displayed on the PCDisplay images from the camera on a full screen Capture the images currently being displayedMuting audio Preset position Zooming Focusing Cdab Brightness, auto function Operations during playback Frame display Other available operations when displaying live imagesScreenshot Step Sequential display Favorite Display Map display Recorder operation Communication Setup Setup Communication Setup Recording/Event Setup Setup Recording/Event SetupRefresh Interval Time AdjustmentNTP Server Address Check of each log of the recorder Log Screenshot Download the setup data Upload the setup data Reboot of the recorder Maintenance RebootDownload the language data Step Download recorded images from the recorder Remote Talk Recorder Setup Monitor System Config Recorder Setup Recorder Info Monitor System InfoAdd a recorder to the monitoring system Edit the recorder informationScreenshot Configure the settings relating to the sequential display Screen Mode Map Setup Monitoring System Config Map SetupOut Sequence Cameras Total TimeMap will be created Subtitle Setup Advanced Setup Monitoring System Config Advanced SetupAlarm Sound Setup Default OnLanguage Monitor System VersionFile Start the RT4ViewerTool LanguageHelp Original playback speed button Reset the adjustedImage display area Playback list display areaPlayback downloaded recorded images Time Range Search and playSelect Channel Alteration check Symptom Cause/solution TroubleshootingSymptom For business users in the European Union
Related manuals
Manual 80 pages 18.29 Kb