Panasonic WJ-RT416 manual Start the RT4Client, Operation window

Page 7

Start the RT4Client

Step 1

Select "RT4Client" from the "Start" menu ("Start" - "All Programs" - "Panasonic" - "RT4 Monitoring Software" - "RT4Client") or double-click the shortcut icon of the RT4Client on the desktop.

The monitoring software will start and the operation window will be displayed.

Operation window

When starting the monitoring software, the operation window will be displayed.

Error/alarm display area

Recorder control buttons

System control buttons

Status display area

Time and date display area

Area selection buttons

Multi-screen selection buttons

Image display area

Recorder information display area

Image display area

Live images from the cameras and recorded images on the recorder will be displayed in this area. The area number is assigned as shown in the illustration below. The selected area will be displayed with a yellow frame.

1 2 3 4

5 6 7 8

9 10 11 12

13 14 15 16

Area selection buttons

The clicked area will be displayed on a single screen. (page 16)

Multi-screen selection buttons

Click the desired multi-screen selection button. The selected multi-screen will be displayed in the image dis- play area.

Status display area

The status icons will be displayed to indicate the status- es of each area. Refer to page 16 for further information about the status icons.

7

Image 7
Contents Operating Instructions Contents Limitation of Liability Disclaimer of WarrantyRT4Client PrefaceRT4Viewer System Requirements for a PC Uninstallation of the monitoring software InstallationStep Operation window Start the RT4ClientRecorder control buttons Error/alarm display areaSystem control buttons Camera State Time and date display areaRecorder information display area Recorder nameError Info Alarm InfoUser Info Configure the network settings of the recorder Configure the Network SettingsConfigure the network settings of a PC Control panel will be displayed Local Area Connection Status window will be dis- played Settings relating to the connection with the recorder Monitor Live Images Display images on a single screen in the image display area Check the status of the cameraDisconnect the connection with camera Control the camerasLogin to the recorder Play recorded images on the recorder Filtering CameraStart/End Start Screenshot Stop playback Save the image currently being displayed on the PC Control panelDisplay the control panel Close the control panelMuting audio Capture the images currently being displayedDisplay images from the camera on a full screen Preset position Zooming Focusing Cdab Brightness, auto function Operations during playback Frame display Other available operations when displaying live imagesScreenshot Step Sequential display Favorite Display Map display Recorder operation Communication Setup Setup Communication Setup Recording/Event Setup Setup Recording/Event SetupNTP Server Address Time AdjustmentRefresh Interval Check of each log of the recorder Log Screenshot Download the setup data Upload the setup data Reboot of the recorder Maintenance RebootDownload the language data Step Download recorded images from the recorder Remote Talk Recorder Setup Monitor System Config Recorder Setup Edit the recorder information Monitor System InfoRecorder Info Add a recorder to the monitoring systemScreenshot Configure the settings relating to the sequential display Total Time Map Setup Monitoring System Config Map SetupScreen Mode Out Sequence CamerasMap will be created Default On Advanced Setup Monitoring System Config Advanced SetupSubtitle Setup Alarm Sound SetupLanguage Monitor System VersionLanguage Start the RT4ViewerFile ToolPlayback list display area Original playback speed button Reset the adjustedHelp Image display areaPlayback downloaded recorded images Select Channel Search and playTime Range Alteration check Symptom Cause/solution TroubleshootingSymptom For business users in the European Union
Related manuals
Manual 80 pages 18.29 Kb