Panasonic WJ-RT416 manual Download recorded images from the recorder

Page 42

Download recorded images from the recorder

It is possible to search the desired recorded images by designating the camera channels, recording type, and the start time and the end time of recording.

Screenshot 1

Click the [Data Download] button (page 8).

The "Data Download" window will be displayed.

Step 1

Set the following search filters.

Camera:

Select the camera channels.

 

To select all the camera channels, check

 

the "All" checkbox.

Filtering:

Select the recording type.

• Off:

Searches without filtering

Manual: Searches for only images recorded by the manual recording

• Timer:

Searches for only images recorded by the

 

timer recording

• Alarm:

Searches for only images recorded by the

 

alarm recording (triggered by a terminal

 

input, VMD and a command alarm recep-

 

tion)

Terminal: Searches for only images recorded by the alarm recording triggered by a terminal input

• VMD:

Searches for only images recorded by the

 

alarm recording triggered by VMD

• Com:

Searches for only images recorded by the

 

alarm recording triggered by a command

 

alarm reception

Start:

Enter the recording start time and date.

End:

Enter the recording end time and date.

Step 2

Click the [Search] button.

Note:

The latest 5 000 recorded images will be displayed in the list form.

42

Image 42
Contents Operating Instructions Contents Disclaimer of Warranty Limitation of LiabilityPreface RT4ClientRT4Viewer System Requirements for a PC Installation Uninstallation of the monitoring softwareStep Start the RT4Client Operation windowError/alarm display area Recorder control buttonsSystem control buttons Recorder name Time and date display areaRecorder information display area Camera StateAlarm Info Error InfoUser Info Configure the Network Settings Configure the network settings of the recorderConfigure the network settings of a PC Control panel will be displayed Local Area Connection Status window will be dis- played Settings relating to the connection with the recorder Monitor Live Images Check the status of the camera Display images on a single screen in the image display areaControl the cameras Disconnect the connection with cameraLogin to the recorder Play recorded images on the recorder Camera FilteringStart/End Start Screenshot Stop playback Close the control panel Control panelDisplay the control panel Save the image currently being displayed on the PCCapture the images currently being displayed Muting audioDisplay images from the camera on a full screen Preset position Zooming Focusing Cdab Brightness, auto function Operations during playback Other available operations when displaying live images Frame displayScreenshot Step Sequential display Favorite Display Map display Recorder operation Recording/Event Setup Setup Recording/Event Setup Communication Setup Setup Communication SetupTime Adjustment NTP Server AddressRefresh Interval Check of each log of the recorder Log Screenshot Reboot of the recorder Maintenance Reboot Download the setup data Upload the setup dataDownload the language data Step Download recorded images from the recorder Remote Talk Recorder Setup Monitor System Config Recorder Setup Add a recorder to the monitoring system Monitor System InfoRecorder Info Edit the recorder informationScreenshot Configure the settings relating to the sequential display Out Sequence Cameras Map Setup Monitoring System Config Map SetupScreen Mode Total TimeMap will be created Alarm Sound Setup Advanced Setup Monitoring System Config Advanced SetupSubtitle Setup Default OnMonitor System Version LanguageTool Start the RT4ViewerFile LanguageImage display area Original playback speed button Reset the adjustedHelp Playback list display areaPlayback downloaded recorded images Search and play Select ChannelTime Range Alteration check Troubleshooting Symptom Cause/solutionSymptom For business users in the European Union
Related manuals
Manual 80 pages 18.29 Kb