Panasonic WJ-RT416 manual Screenshot Step

Page 30

Screenshot 2

Step 3

The frame display will start.

To exit from the frame display, click the [] button at the right top of the window.

Notes:

When 5 cameras are selected, the frame display will start on a 9-screen as shown is the image of "Screenshot 2".

When the resolution setting (Field/SIF) for the selected cameras are set differently, frame display works only for the cameras whose resolution setting is the same as one for the youngest camera num- ber.

When the selected cameras and their resolution set- tings are as table 1 below, "Cam 1" and "Cam 4" are available for the frame display since the resolution setting of "Cam 4" is same as of the youngest cam- era number "Cam 1".

Step 2

Number of areas in the image display area will change depending on a number of the selected cameras.

Number of the selected cameras

Image display

1

Single screen

 

 

2 - 4

4-screen

 

 

5 - 9

9-screen

 

 

10 - 16

16-screen

 

 

When right-clicking on the displayed image, the follow- ing pop-up menu will be displayed.

Stop Frame Display: Stops the frame display

Full Screen: Display the selected image on a full screen

Default Screen: Returns to the multi-screen from the full screen display

 

Camera number

Resolution

 

 

Cam 1

Field

 

 

 

 

 

 

Cam 2

SIF

 

 

 

 

 

 

Cam 3

SIF

 

 

 

 

 

 

Cam 4

Field

 

 

 

 

 

 

 

 

 

30

Image 30
Contents Operating Instructions Contents Disclaimer of Warranty Limitation of LiabilityPreface RT4ClientRT4Viewer System Requirements for a PC Installation Uninstallation of the monitoring softwareStep Start the RT4Client Operation windowError/alarm display area Recorder control buttonsSystem control buttons Recorder name Time and date display areaRecorder information display area Camera StateAlarm Info Error InfoUser Info Configure the Network Settings Configure the network settings of the recorderConfigure the network settings of a PC Control panel will be displayed Local Area Connection Status window will be dis- played Settings relating to the connection with the recorder Monitor Live Images Check the status of the camera Display images on a single screen in the image display areaControl the cameras Disconnect the connection with cameraLogin to the recorder Play recorded images on the recorder Camera FilteringStart/End Start Screenshot Stop playback Close the control panel Control panelDisplay the control panel Save the image currently being displayed on the PCCapture the images currently being displayed Muting audioDisplay images from the camera on a full screen Preset position Zooming Focusing Cdab Brightness, auto function Operations during playback Other available operations when displaying live images Frame displayScreenshot Step Sequential display Favorite Display Map display Recorder operation Recording/Event Setup Setup Recording/Event Setup Communication Setup Setup Communication SetupTime Adjustment NTP Server AddressRefresh Interval Check of each log of the recorder Log Screenshot Reboot of the recorder Maintenance Reboot Download the setup data Upload the setup dataDownload the language data Step Download recorded images from the recorder Remote Talk Recorder Setup Monitor System Config Recorder Setup Add a recorder to the monitoring system Monitor System InfoRecorder Info Edit the recorder informationScreenshot Configure the settings relating to the sequential display Out Sequence Cameras Map Setup Monitoring System Config Map SetupScreen Mode Total TimeMap will be created Alarm Sound Setup Advanced Setup Monitoring System Config Advanced SetupSubtitle Setup Default OnMonitor System Version LanguageTool Start the RT4ViewerFile LanguageImage display area Original playback speed button Reset the adjustedHelp Playback list display areaPlayback downloaded recorded images Search and play Select ChannelTime Range Alteration check Troubleshooting Symptom Cause/solutionSymptom For business users in the European Union
Related manuals
Manual 80 pages 18.29 Kb